Frustrated!!! Need help on ballast connector!!!
Thread Starter
Rookie
Joined: Mar 2008
Posts: 54
Likes: 0
From: CA
Frustrated!!! Need help on ballast connector!!!
i am so mad because of the freaking aftermarket ballast connectors.I have a HID conversion kit from MTEC which looks like this:
then I decided to go with retrofit, so i had my LS430 retrofit done, and also bought a pair of adapters to connect the D2S bulbs to my MTEC ballast:
And today, when i received the adapters, i found out that its connectors are different to my ballast's connectors:
==== adapters' connector
==== adapters' connector
==== ballast's connectorwhat should I do with it??? should I cut the connectors off and connect the ballast's wires directly to the adapters' wires using this butt connector
?? or should i buy a new pair of DENSO ballast??? i am afraid that after getting the DENSO ballast i'm gonna have same kind of a problem again. Cause the 9006 connector looks like this: 
and the DENSO connector looks different:
Last edited by rocker44; May 9, 2008 at 03:19 AM.
i'd like to help though.
Thread Starter
Rookie
Joined: Mar 2008
Posts: 54
Likes: 0
From: CA
by the way do you have any ballasts that have the connectors like the one originally on my ballast??? if you do how much is it for a pair??
Hello,
Not readliy available as our ballasts have different connectors on them. Having said that, I have both the ballast and the connectors you need so it wouldnt be a problem.
Steve
Not readliy available as our ballasts have different connectors on them. Having said that, I have both the ballast and the connectors you need so it wouldnt be a problem.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
williepee
2Gen GS430 / 400/ 300 Classifieds (98-05)
24
Sep 21, 2015 02:09 PM
Aristo300
LS - 3rd Gen (2001-2006)
4
Dec 31, 2013 10:49 AM
newday95
LS460 / 430 / 400 / 600h Classifieds
2
Jul 1, 2013 09:14 PM
masboy
2Gen GS430 / 400/ 300 Classifieds (98-05)
16
Dec 23, 2009 10:13 PM
