On with the TT brakes, Roll the fenders, 20's are here.
03-07-07, 08:38 PM
#1
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
On with the TT brakes, Roll the fenders, 20's are here.
I have been working on installing some parts I have laying around. I made a wear plate to protect the wire harness so I can get the drop I am after. See below
03-07-07, 08:42 PM
#2
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
Its hard to tell here but the front fenders are rolled and ready for my 20's. I'm glad theres not much to see here, Otherwise the fenders would look like $h1t. LOL
03-07-07, 08:48 PM
#4
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
TT brakes, Painted Decaled cleared.
AXXIS pads
SS brake lines
IRotors
Tien HA's
Rears are next for rolling, SS lines, Irotors, and painted calipers.
Pics with the new 20"s coming soon!~
AXXIS pads
SS brake lines
IRotors
Tien HA's
Rears are next for rolling, SS lines, Irotors, and painted calipers.
Pics with the new 20"s coming soon!~
Last edited by ScottURnot; 03-07-07 at 08:51 PM.
03-07-07, 09:03 PM
#6
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
I should have pics up by this weekend. I hope everyone is wrong! I just spent a wad a cash on these to find out. I think the secret is in going low enough to make it work. I will post pics here as soon as I have them installed.
Trending Topics
03-08-07, 07:39 AM
#12
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
I wish! I'm setting here are my desk with a 20" Work Rezax II right at the end of my desk.
Taking them after work to get tires put on. You know how hard it is to set by this wheel all day and focus on work?
03-08-07, 11:25 AM
#14
Super Moderator
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
On the rears the tires you spaced are 1” taller than stock. You can probably get away with the extra height but that width and offset bothers me. My rears are 20x10 +35 and the wheel sets flush with the outmost fender lip. You would most likely need to pull the fenders and run negative camber to pull it off. I currently have a set of 255/35/20 (same as your proposed fronts) tires on the rears and they look huge. I would like to get a set of 285/25/20’s which are .1 shorter than stock but $$$$ is slowing me down.
By this weekend I will have Facts and pictures to back it all up. So many people have said “They will be a easy Fit” I’m not seeing that, while others say “they wont fit” I’m not buying into that either. Watch for a follow up this Saturday or Sunday, no more maybes, might, should, probably, won't, Just the facts, soon.
03-08-07, 12:58 PM
#15
Lead Lap
Join Date: Nov 2002
Location: California
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
By this weekend I will have Facts and pictures to back it all up. So many people have said “They will be a easy Fit” I’m not seeing that, while others say “they wont fit” I’m not buying into that either. Watch for a follow up this Saturday or Sunday, no more maybes, might, should, probably, won't, Just the facts, soon.
BTW: I think 285/25's would be hot!
-craig