****PLP POWERDYNE SC KIT $2999 shipped****
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2002
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
****PLP POWERDYNE SC KIT $2999 shipped****
Horsepower and Torque Gains
* Peak Horsepower: 321 hp @ 6400 rpm **** BD-11 7psi.
* Peak Horsepower Gain: 119HP @ 6400 rpm **** (2001 IS300 7 PSI Kit).
* Peak Torque: 278 lb/ft @ 5600 rpm **** BD-11 7psi.
* Peak Torque Gain: 115 lb/ft @ 6400 rpm **** (2001 IS300 7 PSI Kit).
Asking price: $2999 shipped to the states.
I accept CC through paypal . Please add 3% for CC orders.
Kit includes everything as I received it, emanage, AIC1 with PLP curves preprogrammed.
Also I will include SW to tune the emanage which I had to buy as well as the AIC1 S/W to program the injector.
KIT WILL REQUIRE EMANAGE TUNING B4 you drive it full boost
Kit has run about 15k miles only.
The blower is freshly rebuilt and like new, there is 4months left on the warrantee from powerdyne. If there are any issues I will assist with replacement via original receipt.
This is non intercooled and silent belt driven.
Kit ships from Germany.
Install took me 8 hours with a friend and was mostly straight forward.
PLP link:http://www.prolexperformance.com/pr...roduct.asp?id=2
This was my dyno with a header and heavy 19" wheels (low torque)
Kit is the same one pictured here:
contact me via PM or email: canter@gmx.net
* Peak Horsepower: 321 hp @ 6400 rpm **** BD-11 7psi.
* Peak Horsepower Gain: 119HP @ 6400 rpm **** (2001 IS300 7 PSI Kit).
* Peak Torque: 278 lb/ft @ 5600 rpm **** BD-11 7psi.
* Peak Torque Gain: 115 lb/ft @ 6400 rpm **** (2001 IS300 7 PSI Kit).
Asking price: $2999 shipped to the states.
I accept CC through paypal . Please add 3% for CC orders.
Kit includes everything as I received it, emanage, AIC1 with PLP curves preprogrammed.
Also I will include SW to tune the emanage which I had to buy as well as the AIC1 S/W to program the injector.
KIT WILL REQUIRE EMANAGE TUNING B4 you drive it full boost
Kit has run about 15k miles only.
The blower is freshly rebuilt and like new, there is 4months left on the warrantee from powerdyne. If there are any issues I will assist with replacement via original receipt.
This is non intercooled and silent belt driven.
Kit ships from Germany.
Install took me 8 hours with a friend and was mostly straight forward.
PLP link:http://www.prolexperformance.com/pr...roduct.asp?id=2
This was my dyno with a header and heavy 19" wheels (low torque)
Kit is the same one pictured here:
contact me via PM or email: canter@gmx.net
Thread
Thread Starter
Forum
Replies
Last Post
Lexus_IS300
IS - 1st Gen (2001-2005)
7
12-18-01 10:50 AM