FS: (SoCal) FMIC, FMIC piping, AEM Intake
#1
FS: (SoCal) FMIC, FMIC piping, AEM Intake, Boost Controller, Throttle Body and more!
price drop!!! these things must go!
27x7x3 FMIC
Cute and small, very efficient up to 400whp.
$50 + shipping sold
2.5" FMIC SS piping CUSTOM FIT on GS300
Comes with extra pipes, and a few 3" bends if you need it for anything else. Extra couplers are included as well! A lot of work went into cutting and welding them.
$180 + shipping
AEM Cold Air Intake 3"
Comes with original box.
$120 + shipping.
Stock Suspension - 120k miles
$20 local pickup.Springs and shocks are still good. Perfect if you just need something to go back to stock.
T4 turbocharger heatshield
Brand new, never used got it from Jegs
$60 + shipping.
IS300 Throttle Body Assembly
Fits the GS300 as well, but you need the gs300 throttle cable bracket. The accelerator pedal sensor plastic holder is snapped off and cannot hold a throttle cable; you'll either need to swap the sensor or swap the backet.
$80 + shipping
BRAND NEW 1.3mm 4-layer MLS Head Gasket.
This head gasket is made by erictic based in Socal, and has very good reputation. Perfect for NA-T people, and practically bulletproof.
$40 + shipping.
Boost Controller + Turbo timer from XSPower
This unit is also known has the BCU+ unit, sold on Jegs for over $200.
I will let this go for $150 + shipping.
Tial Style 50mm BOV
Brand new, never used. Has a 11psi spring in it for NA-T engines. Silver color.
$50 + shipping.
27x7x3 FMIC
Cute and small, very efficient up to 400whp.
$50 + shipping sold
2.5" FMIC SS piping CUSTOM FIT on GS300
Comes with extra pipes, and a few 3" bends if you need it for anything else. Extra couplers are included as well! A lot of work went into cutting and welding them.
$180 + shipping
AEM Cold Air Intake 3"
Comes with original box.
$120 + shipping.
Stock Suspension - 120k miles
$20 local pickup.Springs and shocks are still good. Perfect if you just need something to go back to stock.
T4 turbocharger heatshield
Brand new, never used got it from Jegs
$60 + shipping.
IS300 Throttle Body Assembly
Fits the GS300 as well, but you need the gs300 throttle cable bracket. The accelerator pedal sensor plastic holder is snapped off and cannot hold a throttle cable; you'll either need to swap the sensor or swap the backet.
$80 + shipping
BRAND NEW 1.3mm 4-layer MLS Head Gasket.
This head gasket is made by erictic based in Socal, and has very good reputation. Perfect for NA-T people, and practically bulletproof.
$40 + shipping.
Boost Controller + Turbo timer from XSPower
This unit is also known has the BCU+ unit, sold on Jegs for over $200.
TURBO TIMER
BOOST CONTROLLER
TWO PROGRAMMABLE OUTPUTS - Nitrous spray bar, water injection, etc - anything you want to control via a relay.
It has these features:
PRESSURE DISPLAY IN PSI
PROGRAMMABLE TURBO TIMER (CAN BE USED WITH DUAL OR SINGLE IGNITION)
PARKING BRAKE TURBO TIMER OVER RIDE
2 PROGRAMMABLE CHANNELS THAT CAN CONTROL
POSITIVE OR NEGATIVE CONTROL
NITROUS SOLENOID
INTERCOOLER SPRAYER SOLENOID
DEDICATED HI AND LO BOOST SETTINGS
PROGRAMMABLE WARNING SETTINGS (BEEP AND DISPLAY FLASH)
PROGRAMMABLE HI & LO GAIN
START BOOST CONTROL FOR QUICKEST SPOOLING
PROGRAMMABLE LIMIT SETTING TO PREVENT OVERBOOST
PEAK BOOST RECORDING AND LAST BOOST HOLD DISPLAY
TURBO TIMER CAN BE USED MANUALLY OR AUTOMATICALLY - SELF SETTING BASED ON BOOST & DURATION
VOLT METER DISPLAY
SOUNDS CAN BE TURNED ON AND OFF
SELECTABLE DISPLAY IN 6 COLORS TO MATCH YOUR OEM GAUGES.
PROGRAMMABLE BASELINE PRESSURE (FOR USE AT HIGH ELEVATIONS)
Works with single or twin turbos, and runs internal or external wastegates up to 25.5PSI. This has a high quality internal pressure sensor, and a high quality fast response boost control solenoid.
This boost controller builds in the features of several items at once (turbo timer, boost controlled solenoid outputs, etc). It's fully programmable. It can be top or bottom side mounted and includes the mounting bracket and hardware as well as all harnessing. A full manual is included with all wiring diagrams, programming instructions and plumbing instructions for the wastegate and pressure sourcing. -Mark @ XSPower
BOOST CONTROLLER
TWO PROGRAMMABLE OUTPUTS - Nitrous spray bar, water injection, etc - anything you want to control via a relay.
It has these features:
PRESSURE DISPLAY IN PSI
PROGRAMMABLE TURBO TIMER (CAN BE USED WITH DUAL OR SINGLE IGNITION)
PARKING BRAKE TURBO TIMER OVER RIDE
2 PROGRAMMABLE CHANNELS THAT CAN CONTROL
POSITIVE OR NEGATIVE CONTROL
NITROUS SOLENOID
INTERCOOLER SPRAYER SOLENOID
DEDICATED HI AND LO BOOST SETTINGS
PROGRAMMABLE WARNING SETTINGS (BEEP AND DISPLAY FLASH)
PROGRAMMABLE HI & LO GAIN
START BOOST CONTROL FOR QUICKEST SPOOLING
PROGRAMMABLE LIMIT SETTING TO PREVENT OVERBOOST
PEAK BOOST RECORDING AND LAST BOOST HOLD DISPLAY
TURBO TIMER CAN BE USED MANUALLY OR AUTOMATICALLY - SELF SETTING BASED ON BOOST & DURATION
VOLT METER DISPLAY
SOUNDS CAN BE TURNED ON AND OFF
SELECTABLE DISPLAY IN 6 COLORS TO MATCH YOUR OEM GAUGES.
PROGRAMMABLE BASELINE PRESSURE (FOR USE AT HIGH ELEVATIONS)
Works with single or twin turbos, and runs internal or external wastegates up to 25.5PSI. This has a high quality internal pressure sensor, and a high quality fast response boost control solenoid.
This boost controller builds in the features of several items at once (turbo timer, boost controlled solenoid outputs, etc). It's fully programmable. It can be top or bottom side mounted and includes the mounting bracket and hardware as well as all harnessing. A full manual is included with all wiring diagrams, programming instructions and plumbing instructions for the wastegate and pressure sourcing. -Mark @ XSPower
Tial Style 50mm BOV
Brand new, never used. Has a 11psi spring in it for NA-T engines. Silver color.
$50 + shipping.
Last edited by ElitistK; 07-20-08 at 01:21 PM.
Trending Topics
#15
^ Ray do you need anything at all?
i have a TiAL style BOV 50mm from Mark for $50 +shipping. In fact i'll cover the shipping for you if you buy it!
thanks for all the bumps guys. I wish benxd was in this thread as well
i have a TiAL style BOV 50mm from Mark for $50 +shipping. In fact i'll cover the shipping for you if you buy it!
thanks for all the bumps guys. I wish benxd was in this thread as well
Last edited by ElitistK; 07-20-08 at 01:33 PM.