GS300Rich

any special brackets to make them fit in the rear of a 2GS?

GSteg

iTrader: (15)

I highly doubt they'll fit the rear without some crazy brackets

Even then, we dont know if the master cylinder can support it.

vegasgs400

iTrader: (3)

will that bolt right into GS rotors? or i need to upgrade them to LS rotors?

pingu

The GS rotors should work but you wouldn't be utilizing all of the pad surface.

PHML

iTrader: (33)

How many more milimeters does the LS caliper stick out from the GS caliper before hitting wheel spoke?

Got any pics of GS rotors with the LS caliper?

GSteg

iTrader: (15)

I dont know how much exactly, except with my 15mm spacers, I have maybe 4-5mm left between the spoke (17" OEM) and the calipers.

I'll post and find out.

I have no pics of GS rotors and LS calipers. At the moment I'm running my LS4 on LS rotors. I'm not sure if I would even run the calipers on GS rotors.

PureDrifter

iTrader: (10)

won't work properly with GS rotors.

pingu

I am pretty sure you can still use them. Members were discussing this in the huge LS caliper thread in the suspension and wheel 2gs forum.

Rezaxxed

iTrader: (8)

I can't believe these aren't sold yet...anyways. If you still have it by Friday then consider it sold.

dung0981

iTrader: (1)

you need atleast 12-15mm spacer to fit the LS400 in stock 17"
bump for a good seller

GSteg

iTrader: (15)

I edit the original post with new price.

GSteg

iTrader: (15)

Sale pending.....

sam430

iTrader: (10)

I'm surprised it's not sold at 170!

sam430

iTrader: (10)

Hmm... I wonder what the 6 pistons guys have to say about that.

tom steele

i would upgrade the rotors as well there almost a inch bigger in diameter so you will ruin your pads with the stock gs rotors. and gsteg is right our master wont support the back being 4 piston of that size. mine has trouble keeping up with the supercharger it needs more vacumm for the booster! looking into myself to get the most out of my upgrade.