CA F/S: LS430 Projectors
Trending Topics
#11
#12
Sorry i am not trying to crap your thread , i am basing my comments by the bezel that it is not the 430 shroud.
Here is a pic of a ls430 bezel , notice it is not a round shallow area surrounding the bulb it is just off to one side which is below the projector only .
The ones you posted a pic of surrounds the whole area around the projector from what i can see .
So at the very least they may not be LS430 shrouds if it is the right projectors . It may be the angle of the pics as well ,try and take one with a regular camera full frontal.
The other question is ,is it a matched pair of left and right ?
Where did you get them from?
Here is a pic of a ls430 bezel , notice it is not a round shallow area surrounding the bulb it is just off to one side which is below the projector only .
The ones you posted a pic of surrounds the whole area around the projector from what i can see .
So at the very least they may not be LS430 shrouds if it is the right projectors . It may be the angle of the pics as well ,try and take one with a regular camera full frontal.
The other question is ,is it a matched pair of left and right ?
Where did you get them from?
#13
Lexus Test Driver
iTrader: (31)
Joined: Aug 2006
Posts: 1,354
Likes: 6
From: All Around Our Nation's Capital
LeXaNoMicS are fine. That is how they look. The ones in SK's pick have been trimmed toward the bottom to make them fit. The ring around the projector lens goes all the way around.
Oh, and they are a matching pair Left & Right. You can tell by the "wing" or "flap" that comes off each bezel toward each other. That usually needs to be trimmed off to fit but that is the easiest way to tell if they are right or left.
Oh, and they are a matching pair Left & Right. You can tell by the "wing" or "flap" that comes off each bezel toward each other. That usually needs to be trimmed off to fit but that is the easiest way to tell if they are right or left.
Last edited by KiPod; 04-23-09 at 05:11 AM.