Im looking for a GS400 tranny, the A650E. It differs from the 300. Im not too concerned with mileage. Let me know what you got. Thanks

 

i have a tranny from a 97 sc400... let me know if that will work...
pm me if you're interested
-john

 

Its a different tranny, the 98 SC's started using the A650E. Thanks anyhow.

 

i have an a650e from my GS300. are you sure they are different?

 

the 01+ GS300 also uses the A650E. The 98-00 used the A650. The E stands for E-Shift. They should be the same as long as they're both A650e's.

 

curious why you need a tranny? Only asking since I beat on mine regularly and it has 156k.....I did see a GS400 trans on ebay awhile back...not sure if it was the e-shift or not.

 

if it was specifically listing GS400 as an application, it's the eshift.

 

huh...I thought the 00-01 didn't have e-shift transmissions....guess I was wrong

Anyway...here:

http://cgi.ebay.com/ebaymotors/98-99...lenotsupported

http://cgi.ebay.com/ebaymotors/TRANS...lenotsupported

 

After researchinga bit more, I was wrong, the GS3 did ocme with that tranny too...so you guys are correct.

I dont need one due to a tranny being bad, I just need one. I sold my stock tranny when I installed my TH400 set up with the twin turbo build. I found a place that says they can build the stock tranny to hold the 600 rwhp that will be thrown at it, so IM thinking about trying it out.

 

mine is giving me some issues but im thinking it could just be my torque converter

 

Don't believe shops who claim they can build the A650E transmission to hold anything over 450rwhp reliably. The biggest problem that toyota transmission face is the sprag and bearings. I'm currently in the process of figuring out how to make it stronger by having a compay make custom heavy duty sprag and bearings for me to test out. Also, you'll need to have the gears cryo treated and friction plates upgraded to a heavier duty material. Right now, my friend who is the transmission builder for the 3SX 3000GT Drag car is figuring out how to make it stronger but needs a spare transmission that we can test on. PM me if you are interested in testing out one of our transmission.

 

Sent you a PM.

 

I also have a spare 98+ sc400 transmission if you're interested. I was holding on to it for the same reasons, but priorities have changed and I doubt I'll ever get around to sending it out to get built.

 

i replaced my TC and that was my problem.. so im good

 

Hey man, here are pics I took of the tranny. I finally got around to removing it from the block.