CA FS: GS400 K&N FIPK Intake
10-19-10, 09:42 AM
#1
FS: GS400 K&N FIPK Intake
I'm selling a K&N FIPK Intake for the 98-00 GS400. It was on my brother's car for a while, but the radiator just cracked so he needs money for a new one. This intake makes a nice growl at WOT and it will compliment many exhaust out there (especially the Greddy 
). Those who went to the Pursuit 2 probably heard it when it was running down the 1/8th mile track.
Few things missing on intake though:
(1) Top and bottom rubber gasket for the heatshield. You can get a nicer sealing one from Home Depot.
(2) The metal piece that holds the intake to the heatshield is missing. Either make one yourself or leave it off. I left it off and have had no problems.
(3) One of the hoses is missing, so I used some vinyl hose instead and it works fine. If you're paranoid, you can use a rubber hose from your local autopart store instead.
SOLD
Attached is a picture I took from my iPhone. Will try to get better pics soon
). Those who went to the Pursuit 2 probably heard it when it was running down the 1/8th mile track. Few things missing on intake though:
(1) Top and bottom rubber gasket for the heatshield. You can get a nicer sealing one from Home Depot.
(2) The metal piece that holds the intake to the heatshield is missing. Either make one yourself or leave it off. I left it off and have had no problems.
(3) One of the hoses is missing, so I used some vinyl hose instead and it works fine. If you're paranoid, you can use a rubber hose from your local autopart store instead.
SOLD
Attached is a picture I took from my iPhone. Will try to get better pics soon
Last edited by blisiono; 11-09-10 at 07:12 PM.
10-20-10, 03:53 PM
#2
Bump for a good seller. I was able to hear this car in person along with his exhaust at the Pursuit and it sounded like an angry ape ready to tear your nuts apart.
Too bad you didn't let me know you were trying to sell one because I bought the same intake a few weeks ago.
Too bad you didn't let me know you were trying to sell one because I bought the same intake a few weeks ago.
Trending Topics
11-01-10, 08:59 AM
#9
It will fit but you will have to, do alittle mod. Moving that power steering resivore to the shock tower, & maybe just alittle extension @ the throttle body, so the bend clears the thermostat housing. Me & you have talked about this b4 on the SRT intake.
Thread
Thread Starter
Forum
Replies
Last Post
GSteg
2Gen GS430 / 400/ 300 Classifieds (98-05)
6
02-26-07 11:20 PM
TXSTYLE
2Gen GS430 / 400/ 300 Classifieds (98-05)
6
06-10-02 09:03 AM
