When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The pipe is stainless steel. The pipe has two O2 sensor bungs. First bung is for the O2 sensor, the second O2 bung is for a "WideBand (a/f) sensor. Currently, the second O2 bung is closed off, I have a threaded bolt in there.
The pipe replaces the factory exhaust pipe with the third cat underneath the car. This pipe will only fit the GS300. You should see about 5rwhp with this exhaust pipe and should get a slightly deeper growl with your exhaust. You MAY need to purchase factory gaskets to use with the exhaust pipe, I used my existing ones as they were still good. Also, use the OEM bolts too….basically an easy direct swap. The brown marking is NOT rust/corrosion. Its the silver high-temp paint that turned brown due to the heat generated. I just bought this and of course other priorities requiring money has popped up. If you have any questions feel free to ask!
It was just coated? Is the pipe polished stainless steel underneath?
in the ad I stated I had just bought this exhaust piece recently. The entire exhaust was coated by the previous owner and in person it is nothing more than a dull silver appearance it's stainless steel under the coating.
BUMP! $320 Shipped! Really would like to make some space in my shed. Like I said it would be shipped USPS so same as shipping from the east coast basically.
is there anything that i would need to do to it to make street legal? or is it more of plug n play?
I don't know how UT's laws are, but if it's anything like CA and you have any mod without an emissions approved sticker then its illegal. But honestly cops are going to profile hondas, evos, sti, etc. before they profile a lexus. This replaces the front b-pipe section so its more of a straight pipe with 2 freer resonators and it doesn't effect emissions sniffer testing as long as you use a mechanical CEL fix adapter that basically extends your O2 sensor so it doesnt throw a code. If you want you could conceal it a tad more by painting it black and/or taking off the heat shields from your stock b-pipe and moving them over to cover if they fit.
I gotta say I really like how it sounds with my Fujitsubo legalis catback