Rotora Big Brake kit
#1
Rotora Big Brake kit
I'm putting my Rotora Big Brake kit for the GS300 / GS400 / GS430 up forsale.
If you want info on the kit, go here:
https://www.clublexus.com/forums/sho...threadid=82466
I have put less than 1500 miles on this kit.
Including the front Big Brake setup, I am also throwing in the Rotora rear setup.
so, here's a break down of everything included.
fronts (less than 1500 miles):
-a set of pre-installed 4-piston calipers BLUE is what I have
-a set of 1 piece cross-drilled/slotted oversize, vented, “e-coated” discs (330mm)
-a set of high carbon steel (S45C) mounting brackets
-a set of Rotora brake pads
-a set of stainless steel braided brake lines with hardware
rears (less than 3000 miles):
-a set of stock brake calipers coated Black with Foliatec caliper paint
-a set of stock replacement slotted rear disks
-a set of AXXIS metal master brake pads
-a set of Goodrich stainless steel braided brake lines with hardware
I am not sure what other vehicles this will fit, so please do not ask me.
I am upgrading to a full front and rear kit, so I need to sell this setup.
$1350 shipped for the entire setup.
I will take pictures upon request.
This setup is still on my car currently, and will be removed within the next week.
THANKS!
If you want info on the kit, go here:
https://www.clublexus.com/forums/sho...threadid=82466
I have put less than 1500 miles on this kit.
Including the front Big Brake setup, I am also throwing in the Rotora rear setup.
so, here's a break down of everything included.
fronts (less than 1500 miles):
-a set of pre-installed 4-piston calipers BLUE is what I have
-a set of 1 piece cross-drilled/slotted oversize, vented, “e-coated” discs (330mm)
-a set of high carbon steel (S45C) mounting brackets
-a set of Rotora brake pads
-a set of stainless steel braided brake lines with hardware
rears (less than 3000 miles):
-a set of stock brake calipers coated Black with Foliatec caliper paint
-a set of stock replacement slotted rear disks
-a set of AXXIS metal master brake pads
-a set of Goodrich stainless steel braided brake lines with hardware
I am not sure what other vehicles this will fit, so please do not ask me.
I am upgrading to a full front and rear kit, so I need to sell this setup.
$1350 shipped for the entire setup.
I will take pictures upon request.
This setup is still on my car currently, and will be removed within the next week.
THANKS!
#3
can you pm me some pics of the set up and we can talk , i just today put on some 19in ssr gt3 with high disk and was about to order the supra brake upgrade from steve you hit me back asap
#4
Originally posted by lexforlife
can you pm me some pics of the set up and we can talk , i just today put on some 19in ssr gt3 with high disk and was about to order the supra brake upgrade from steve you hit me back asap
can you pm me some pics of the set up and we can talk , i just today put on some 19in ssr gt3 with high disk and was about to order the supra brake upgrade from steve you hit me back asap
i probably won't have any pictures of the brakes until i remove them from my car.
this won't happen until next week.
here's the front brake setup on my gs
Last edited by TerryTCL; 10-10-03 at 01:53 PM.
#5
Guys,
I want $1350 shipped for the front and rear setup....
$1550 is what the front kit is going for new.
rear rotora disks ar around $125 if i remember correctly
$50 for the pads
$50 for the brake lines (less than half for a new goodrich SS line set $120)
that's almost a $2000 brake setup
with low miles for $1350 shipped...
I want $1350 shipped for the front and rear setup....
$1550 is what the front kit is going for new.
rear rotora disks ar around $125 if i remember correctly
$50 for the pads
$50 for the brake lines (less than half for a new goodrich SS line set $120)
that's almost a $2000 brake setup
with low miles for $1350 shipped...
Trending Topics
#12
Rotora Big Brake upgrade
fronts (less than 1500 miles):
-a set of pre-installed 4-piston calipers BLUE is what I have
-a set of 1 piece cross-drilled/slotted oversize, vented, “e-coated” discs (330mm)
-a set of high carbon steel (S45C) mounting brackets
-a set of Rotora brake pads
-a set of stainless steel braided brake lines with hardware
$1050 shipped
Rotora stock upgrade
rears (less than 3000 miles):
-a set of stock brake calipers coated Black with Foliatec caliper paint
-a set of stock replacement slotted rear disks
-a set of AXXIS metal master brake pads
-a set of Goodrich stainless steel braided brake lines with hardware
$200 shipped
fronts (less than 1500 miles):
-a set of pre-installed 4-piston calipers BLUE is what I have
-a set of 1 piece cross-drilled/slotted oversize, vented, “e-coated” discs (330mm)
-a set of high carbon steel (S45C) mounting brackets
-a set of Rotora brake pads
-a set of stainless steel braided brake lines with hardware
$1050 shipped
Rotora stock upgrade
rears (less than 3000 miles):
-a set of stock brake calipers coated Black with Foliatec caliper paint
-a set of stock replacement slotted rear disks
-a set of AXXIS metal master brake pads
-a set of Goodrich stainless steel braided brake lines with hardware
$200 shipped
#14
Originally posted by skpark70
Im interested in FRONT setup only, could you post some pics and is $1050 firm price or still negotiable?
Im interested in FRONT setup only, could you post some pics and is $1050 firm price or still negotiable?
i'll take pics as soon as i can...
yes, price is firm unless you have your own shipping account...