F/s tanabe df210 springs
#16
i dunno about the GS springs, but i know a lot of the tanabe springs made for the IS, there was a bad batch that made the front sit SUPER high (like the same as stock), and the rear was super slammed. there was a member with a silver IS and carbon fiber hood that had that problem
#17
he had that problem with the IS springs?? I'm pretty positve and sure these springs won't do that. in fact my brothers friend runs these springs on 20's and they sit VERY nicely. DEF. can't go wrong with these.
thanks buddy!
thanks buddy!
Last edited by Pnuge88; 01-26-09 at 04:55 PM.
#20
Driver School Candidate
Join Date: Jan 2009
Location: Sunshine state
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I have for sale BRAND NEW tanabe DF210 for the GS350 BUT it also fits the is250/350. I bought these cause it's probably the best springs for a very nice drop. they go lower then the H&R springs i had before on my 250.
the drop for a gs350 is 2.0 in front and 1.8 in the rear.
my H&R drop was 1.5 front and 1.3 rear
im gonna guess that it will be pretty balanced like the picture im gonna post.
I really don't know how much they drop on the IS (weight difference from gs) but I know for a fact it's lower then most springs out there and some memebers can come in and vouch that have this setup.
200+shipping FIRM (paypal +3%)
UPDATE PICTURE~!!!!!****************
my brothers friend sinister2c (lmk if you have a problem using your pics. THANKS)
the drop for a gs350 is 2.0 in front and 1.8 in the rear.
my H&R drop was 1.5 front and 1.3 rear
im gonna guess that it will be pretty balanced like the picture im gonna post.
I really don't know how much they drop on the IS (weight difference from gs) but I know for a fact it's lower then most springs out there and some memebers can come in and vouch that have this setup.
200+shipping FIRM (paypal +3%)
UPDATE PICTURE~!!!!!****************
my brothers friend sinister2c (lmk if you have a problem using your pics. THANKS)
#21
Pole Position
iTrader: (4)
Join Date: Nov 2007
Location: SanAntonio,TX
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
hey mIStaboi im curious, how much of a gap
difference is there between the front and the
rear with the GStanabes on the 2IS? or i guess
the question i should be asking is what is the gap of
the front and rear with them on with stock wheels?
difference is there between the front and the
rear with the GStanabes on the 2IS? or i guess
the question i should be asking is what is the gap of
the front and rear with them on with stock wheels?
#22
i never actually seen them on stocks but most likely it is lower then the H&R springs. if you see sinister2c's rims thats how much of gap there probably is. i wouldnt be surprised cause look at my h&R drop already. you have the springs now too so you can just kinda picture it and see that these will definitely be lower when comparing it to the picture(sinister2c's car). not by a whole lot but surely its gonna be lower for sure at least .3 of an inch is my guess.
Last edited by Pnuge88; 01-28-09 at 01:30 PM.
#26
im running 275/30/20 in the rear and 245/30/20 in the front. No rubbing issues what so ever. Rear tucks 0.5" of the tire and front sits right at the tire.
I would recommend these if you are running 19's or 20's for the best look. 2 of my cousins and bother run these same springs on their 2IS.
superioro1 car with one chopped coil up front
lam n 002 car
I would recommend these if you are running 19's or 20's for the best look. 2 of my cousins and bother run these same springs on their 2IS.
superioro1 car with one chopped coil up front
lam n 002 car
Thread
Thread Starter
Forum
Replies
Last Post
seivonecsu
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
20
03-01-13 01:50 PM
dagr8tsthustla
2Gen GS430 / 400/ 300 Classifieds (98-05)
11
04-26-03 09:09 PM