06+ Lexus IS350 Tein Super Street Coilovers for Sale
#1
06+ Lexus IS350 Tein Super Street Coilovers for Sale
I have a set of used Tein Super Street Coilovers for a 06+ Lexus IS350 for sale. I bought these off a member from the clublexus. I have not installed these myself, they are in the same condition I received them.
Please note that there are some hardware pieces missing (i.e. a couple of nuts and bolts. The rest is there. You can order the parts from Tein.
These have been in my garage for a while, and just want them gone. It is either sell them or they go in the garbage.
$250 plus shipping.
Please note that there are some hardware pieces missing (i.e. a couple of nuts and bolts. The rest is there. You can order the parts from Tein.
These have been in my garage for a while, and just want them gone. It is either sell them or they go in the garbage.
$250 plus shipping.
#6
what are missing... the top hats... i know... anything else??? i'll buy those off you if you can tell me what's missing and where to send payments.. oh yeah and the miles on them as well
Last edited by acefalcon2; 02-09-09 at 06:31 AM.
#7
As far as the milage, I will tell you what I was told when I bought them. The owner told me that he had 8,000 miles on them. I never got installed them when I had my lexus.
The missing parts are as follows:
Please see the last picture (Pic #4). Starting from the bottom of the pic, there are three nuts (should be 4). Above that there are 3 washers/spacers (should be 4). Above that there are 2 rings (should be 4).
Note: It is my understanding that those are the only missing parts. The two bump stops are included, and I believe you re-use your other two stock ones.
I hope this helps, this is what I know.
Here is a link to the install manual which lists all the parts and what stock parts are to be re-used.
http://www.tein.com/tech_info/inst/kl90u.pdf
If you are interested, let me know you zip and I can give you approx. shipping costs as well.
The missing parts are as follows:
Please see the last picture (Pic #4). Starting from the bottom of the pic, there are three nuts (should be 4). Above that there are 3 washers/spacers (should be 4). Above that there are 2 rings (should be 4).
Note: It is my understanding that those are the only missing parts. The two bump stops are included, and I believe you re-use your other two stock ones.
I hope this helps, this is what I know.
Here is a link to the install manual which lists all the parts and what stock parts are to be re-used.
http://www.tein.com/tech_info/inst/kl90u.pdf
If you are interested, let me know you zip and I can give you approx. shipping costs as well.
Trending Topics
#9
Says it would be about $30 via priority mail.
Total would be $280 shipped.
Paypal can be sent to richw350@bellsouth.net
Total would be $280 shipped.
Paypal can be sent to richw350@bellsouth.net
#14
To all that posted here or sent me a PM. There is a sale pending. I am giving this person an opportunity to send the payment tonight. If not, I will go to the next person. I am going in the order that I was contacted about payment. I have send a reply PM to this person. If that does not work, I shall PM the next person in line.
Thank you.
Thank you.