F/S: Low Profile E-Cutout
#1
F/S: Low Profile E-Cutout
Hi, this low profile E-cutout will give you an option to run your stock exhaust and at the same time an ability to make your car sound like it has an open exhaust, all at the push of a button.!
I know this setup will work for any IS-x out there, with stock exhaust or axel-back after market setup.
Even will work for IS-F
Installation:
The low profile e-cutout will replace your OEM "pre-muffler" or "resonator". It connects via cable, to the inside of your car, and at the push of a button you can open up the exhaust and LET IT RIP!!!!!!!!!!!!! hahahah
The e-cutout, has already been welded to a straight pipe for you, so all the exhaust man has to do, is cut the pre-muffler out and weld this e-cutout on.
Reason for selling:
I bought this from radicalrev(if i can remember correctly-lol), but I never got to install it
I need to buy some more camera upgrades, so i have not been able to install this.
Price:
205 = shipped
200 = Local (So Cal/la county/orange county/Ventura etc..)
Pictures up soon.
PM me for info, and post that you did, if you did.
Thanks for looking.
-pauL
I know this setup will work for any IS-x out there, with stock exhaust or axel-back after market setup.
Even will work for IS-F
Installation:
The low profile e-cutout will replace your OEM "pre-muffler" or "resonator". It connects via cable, to the inside of your car, and at the push of a button you can open up the exhaust and LET IT RIP!!!!!!!!!!!!! hahahah
The e-cutout, has already been welded to a straight pipe for you, so all the exhaust man has to do, is cut the pre-muffler out and weld this e-cutout on.
Reason for selling:
I bought this from radicalrev(if i can remember correctly-lol), but I never got to install it
I need to buy some more camera upgrades, so i have not been able to install this.
Price:
205 = shipped
200 = Local (So Cal/la county/orange county/Ventura etc..)
Pictures up soon.
PM me for info, and post that you did, if you did.
Thanks for looking.
-pauL
Last edited by t0e; 02-24-09 at 03:15 AM.
#5
For those that have no idea what an E-cutout is, click on this link:
http://www.youtube.com/watch?v=P0tk5k7Gyp4
Yes, it is controlled though a control unit (with a button), that is connected VIA wire to that black harness, on top of the cut-out.
I believe the installer will use power from your LED wires.
http://www.youtube.com/watch?v=P0tk5k7Gyp4
Yes, it is controlled though a control unit (with a button), that is connected VIA wire to that black harness, on top of the cut-out.
I believe the installer will use power from your LED wires.
Trending Topics
#11
I am not sure who made it, as I purchased it 2nd party.
Once you close it up, you will go back to normal silent exhaust, its that easy. That's what this was designed for, when you want to make some NOISE!
Think g35/swap / m3 (ish)
FG2 with E-Cutout
http://www.youtube.com/watch?v=lctK-aaWT5c
IS-F with E-Cutout
http://www.youtube.com/watch?v=D86feQwfqLU
m3-with straight pipe
http://www.youtube.com/watch?v=zRQ4YBWFJBU
http://www.youtube.com/watch?v=gg6ozmFX9Pk
CLK500 E-Cutout Exhaust E-cutout
http://www.youtube.com/watch?v=7LwJ5vH0NUI
G35 E-Cutout
http://www.youtube.com/watch?v=eMeJyR-KfGk
Of course, all cars have different engines, but you should get the point, with these examples.
Last edited by t0e; 02-25-09 at 08:05 AM.