WA Rotrex supercharger setup
#1
Pole Position
Thread Starter
Rotrex supercharger setup
FOR SALE
A supercharger kit for lexus is350 is250 06-13 comes with
tial bov
Mishimoto black z-line intercooler
Crank pulley
Rotrex aluminum bracket to mount a c30-94 to engine block
Spacer for braket
Gates belt
2 tensioner pulleys
All piping (pipe to throttle body is pre-drilled for water meth kit)
All bolts, clamps, hose ends
COMES with a brand new zero mile Rotrex c30-94
To complete setup the rotrex oiling system will have to be purchased and your choice of oil cooler.
Also a Rotrex supercharger pulley will have to be purchased(I would go with a 80mm for somewhere around 7 psi for is350 and 7.5 psi for is250 ) up to you how much boost you want.
No low ballers shop will charge 6k to make same setup
I'm asking $3850.00 willing to ship...
PLEASE READ EVERYTHING SO YOU KNOW WHAT YOUR BUYING...
Supercharger setup for lexus is350 is250 06-13. *This a custom kit so will require installation by a reputable automotive shop. Comes with a mishimoto intercooler, tail qr bov, custom crank pulley, custom supercharger bracket with spacers to mount to the block of the motor. *There's 2 tensioner pulleys on the on the supercharger bracket. *The intake pipe that bolts to the throttle body is pre taped for a water meth kit(which will have to be purchased separately). 1 Gates micro-v belt is included. The setup comes with a brand new zero miles Rotrex C30-94. *The setup is missing a vacuum hose for the Tial bov also hose that connects one intercooler pipe to the intercooler, both of those items a inexpensive to replace. *This kit is *90% complete.
Items needed to finish a solid setup capable of 100whp increase on a is350 is... a water meth kit, rotrex oiling system, rotrex traction oil, and oil cooler, and finally your choice of Rotrex supercharger pulley (I personally would choose there 80mm 8 rib pulley should give about 7psi on a is350 and about 7.5psi on a is250) THIS SETUP using the stock air box so maf is left untouched. Inlet of supercharger connects with outlet of the filter box just like a HKS kit, also the Tial bov is recirculated not blown out to atmosphere. *
Items are dirty and black paint on intercooler piping is flaking so could use a new coating, intercooler has no leaks, just natural wear and tear. *I will ship only in the lower 48 states if bidding out of there will require more money to ship.
A supercharger kit for lexus is350 is250 06-13 comes with
tial bov
Mishimoto black z-line intercooler
Crank pulley
Rotrex aluminum bracket to mount a c30-94 to engine block
Spacer for braket
Gates belt
2 tensioner pulleys
All piping (pipe to throttle body is pre-drilled for water meth kit)
All bolts, clamps, hose ends
COMES with a brand new zero mile Rotrex c30-94
To complete setup the rotrex oiling system will have to be purchased and your choice of oil cooler.
Also a Rotrex supercharger pulley will have to be purchased(I would go with a 80mm for somewhere around 7 psi for is350 and 7.5 psi for is250 ) up to you how much boost you want.
No low ballers shop will charge 6k to make same setup
I'm asking $3850.00 willing to ship...
PLEASE READ EVERYTHING SO YOU KNOW WHAT YOUR BUYING...
Supercharger setup for lexus is350 is250 06-13. *This a custom kit so will require installation by a reputable automotive shop. Comes with a mishimoto intercooler, tail qr bov, custom crank pulley, custom supercharger bracket with spacers to mount to the block of the motor. *There's 2 tensioner pulleys on the on the supercharger bracket. *The intake pipe that bolts to the throttle body is pre taped for a water meth kit(which will have to be purchased separately). 1 Gates micro-v belt is included. The setup comes with a brand new zero miles Rotrex C30-94. *The setup is missing a vacuum hose for the Tial bov also hose that connects one intercooler pipe to the intercooler, both of those items a inexpensive to replace. *This kit is *90% complete.
Items needed to finish a solid setup capable of 100whp increase on a is350 is... a water meth kit, rotrex oiling system, rotrex traction oil, and oil cooler, and finally your choice of Rotrex supercharger pulley (I personally would choose there 80mm 8 rib pulley should give about 7psi on a is350 and about 7.5psi on a is250) THIS SETUP using the stock air box so maf is left untouched. Inlet of supercharger connects with outlet of the filter box just like a HKS kit, also the Tial bov is recirculated not blown out to atmosphere. *
Items are dirty and black paint on intercooler piping is flaking so could use a new coating, intercooler has no leaks, just natural wear and tear. *I will ship only in the lower 48 states if bidding out of there will require more money to ship.
Last edited by nikogio38; 12-24-15 at 06:56 PM.
#7
Pole Position
Thread Starter
Trending Topics
#12
Pole Position
Thread Starter