HI Stoptech BBK 6/4 pot for is250/350
11-05-17, 10:20 PM
#1
Pole Position
Thread Starter
Stoptech BBK 6/4 pot for is250/350
Selling a rebuilt stoptech bbk kit with new brake lines, and new brake pads.
Rotors have 10k miles on them.
Since I got the bbk’s back from the shop I have put 0 miles on them, I just don’t have a use for them (see backstory on why I don’t if interested and curious)
Willing to sell locally and to the upper 48 states (mainland us).
Selling for $1500 (including shipping) plus any paypal fees
If local I will give lower as it will have no shipping cost.
For shipping keep in mind that I’ll be shipping the 4 calipers, new lines and pads, and all rotors (each rotor weighs 20lbs) from Hawaii
If interested I will dm you my number for faster contact.
QUICKBACKSTORY
A few years ago I purchased stoptech big brake kit from a member on clublexus when I still had my is250. I had them powdercoated in a (almost) burnt copper color of which these pics don’t really do the color justice. But to give you a feel for the color its between the gtr and the rcf/gsf caliper color. The shop I had powdercoat it and rebuild the calipers took over 7months of which by the time I got them back, I upgraded to an isf. I don’t want to put this on an isf as it will require hubs for the front to work. Therefore I am selling it. I will include all paperwork that I had it legitimately powdercoated at a company here locally, and I didn’t do it on my own for your own sake.
ADDITIONAL INFO:
the sizing for the bbk is as follows:
rotors are F: 355x32 and R: 345x28
all are slotted
and if interested the boot sizes for the caliper are as follows:
F: 4-36mm and 2-30mm for left and right side
R: 2-30mm and 2-28mm each for left and right side
ordered parts from zeckhausen racing
weights are as follows
Front Caliper is roughly 10lb each
Reach Caliper is roughly 9lb each
Front Rotor is about 19.8lb
Rear Rotor is about 19lb
Rotors have 10k miles on them.
Since I got the bbk’s back from the shop I have put 0 miles on them, I just don’t have a use for them (see backstory on why I don’t if interested and curious)
Willing to sell locally and to the upper 48 states (mainland us).
Selling for $1500 (including shipping) plus any paypal fees
If local I will give lower as it will have no shipping cost.
For shipping keep in mind that I’ll be shipping the 4 calipers, new lines and pads, and all rotors (each rotor weighs 20lbs) from Hawaii
If interested I will dm you my number for faster contact.
QUICKBACKSTORY
A few years ago I purchased stoptech big brake kit from a member on clublexus when I still had my is250. I had them powdercoated in a (almost) burnt copper color of which these pics don’t really do the color justice. But to give you a feel for the color its between the gtr and the rcf/gsf caliper color. The shop I had powdercoat it and rebuild the calipers took over 7months of which by the time I got them back, I upgraded to an isf. I don’t want to put this on an isf as it will require hubs for the front to work. Therefore I am selling it. I will include all paperwork that I had it legitimately powdercoated at a company here locally, and I didn’t do it on my own for your own sake.
ADDITIONAL INFO:
the sizing for the bbk is as follows:
rotors are F: 355x32 and R: 345x28
all are slotted
and if interested the boot sizes for the caliper are as follows:
F: 4-36mm and 2-30mm for left and right side
R: 2-30mm and 2-28mm each for left and right side
ordered parts from zeckhausen racing
weights are as follows
Front Caliper is roughly 10lb each
Reach Caliper is roughly 9lb each
Front Rotor is about 19.8lb
Rear Rotor is about 19lb
Last edited by 808newbie; 11-06-17 at 10:35 PM. Reason: additional info provided
The following users liked this post:
808newbie (11-06-17)
11-15-17, 06:34 PM
#12
I was thinking... if these rotors will work with the stock IS-F calipers, and you're really in it for show, lmk if you want to work a deal where I have brand new IS-F rotors sent to you (they are the exact same size) and you send the lighter 2-piece'rs to me. It'd net you some cash, and you'd still have big drilled rotors w/super awesome custom calipers. Win win win... thx.
Thread
Thread Starter
Forum
Replies
Last Post
Carson-Lex
Club Lexus Vendor Marketplace
4
11-25-11 11:39 AM
sks
SC400 / 300 Classifieds
14
01-27-10 02:36 PM
