** GB ** JoeZ IS250/350 Intake Pipe **
#1
Original CL Sponsor since 1999
Thread Starter
** GB ** JoeZ IS250/350 Intake Pipe **
** Thank you to all the CL members who made this GB a great success. At this time the GB is now over, we have completely sold out of intakes for this run. Keep an eye out for future JoeZ GB's**
Hey guys, we have received a lot of request for this item so it really needs no introduction ...
The JoeZ IS250/350 Intake Pipe
GB PRICE IS $110.00 Shipped (lower 48 states)
MSRP IS 119.00 + Shipping
**TAX WILL APPLY TO ALL CALIFORNIA ORDERS**
Use GB code CLGBJOEZ
Order HERE
Please specify in the comments section if you would like Polished or Black Anodized
Here are the specs on the pipe
Dress up your engine and gain power while you are at it with this 3"
Aluminum Intake Pipe specifically designed for your IS250, IS250awd &
IS350. The Direct Air Flow Intake (D-AFI) Pipe is constructed of 6061-T4
aluminum which has been mandrel bent and polished to a fine luster. The
Black Finish pipes have gone through a special process and are completed in a Satin Black Anodized Finish for that stealthy OEM look!!
Independent DYNO Test results on a stock IS350 have shown gains of 5+ Rwhp Max Power & 5+ ft.lbs of Peak Torque.
The stock manual 6 speed IS250 showed gains of 6+ Rwhp Max Power & 5.6+ ft.lbs of Peak Torque.
This pipe replaces the factory plastic tube of the stock intake system, fully utilizing the stock air box. The intake pipe inner surface has a smooth design that will give your oem system optimal air flow with out any disruptions.
No need for Tuning and NO Check Engine Lights..!!
Included are Silicone sleeves available only in Black. Also, four Brushed Stainless Steel clamps along with simple to follow install directions, will make this intake swap a breeze.
Combine this intake with an Available Drop-in-Filter, to Fully Maximize Air Flow from the OEM Ram Air set up...!!!
Hey guys, we have received a lot of request for this item so it really needs no introduction ...
The JoeZ IS250/350 Intake Pipe
GB PRICE IS $110.00 Shipped (lower 48 states)
MSRP IS 119.00 + Shipping
**TAX WILL APPLY TO ALL CALIFORNIA ORDERS**
Use GB code CLGBJOEZ
Order HERE
Please specify in the comments section if you would like Polished or Black Anodized
Here are the specs on the pipe
Dress up your engine and gain power while you are at it with this 3"
Aluminum Intake Pipe specifically designed for your IS250, IS250awd &
IS350. The Direct Air Flow Intake (D-AFI) Pipe is constructed of 6061-T4
aluminum which has been mandrel bent and polished to a fine luster. The
Black Finish pipes have gone through a special process and are completed in a Satin Black Anodized Finish for that stealthy OEM look!!
Independent DYNO Test results on a stock IS350 have shown gains of 5+ Rwhp Max Power & 5+ ft.lbs of Peak Torque.
The stock manual 6 speed IS250 showed gains of 6+ Rwhp Max Power & 5.6+ ft.lbs of Peak Torque.
This pipe replaces the factory plastic tube of the stock intake system, fully utilizing the stock air box. The intake pipe inner surface has a smooth design that will give your oem system optimal air flow with out any disruptions.
No need for Tuning and NO Check Engine Lights..!!
Included are Silicone sleeves available only in Black. Also, four Brushed Stainless Steel clamps along with simple to follow install directions, will make this intake swap a breeze.
Combine this intake with an Available Drop-in-Filter, to Fully Maximize Air Flow from the OEM Ram Air set up...!!!
Last edited by Carson-Lex; 01-02-08 at 12:11 PM.
#4
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
The 1st picture of the Black Intake (not installed) is exactly how it will come.
Unless you get the Polished.
There happens to be just one Silver one left, and I am sure Luis will update his post once its been sold..
Joe Z
Please specify in the comments section if you would like Polished, Black Anodized or Silver Anodized
Here are the specs on the pipe:
Included are Silicone sleeves available only in Black. Also, four Brushed Stainless Steel clamps along with simple to follow install directions, will make this intake swap a breeze.
Trending Topics
#11
Lexus Champion
iTrader: (3)
Join Date: Sep 2007
Location: BayArea-CA
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
I placed the order, no tax so far. they sent me a email confirmation that shipping and handling would be calculated. according to the listing shipping suppose to be included. total cost so far 110.00
#13
Lexus Connoisseur
I will vouch for my 2GR-FSE Joe Z intake.
The sound is pronounced and it gives a nice deep tone at WOT. At the same time, it fits under all of the stock engine covering with no issues at all.
The sound is pronounced and it gives a nice deep tone at WOT. At the same time, it fits under all of the stock engine covering with no issues at all.
#15
Lexus Connoisseur