CA Greddy Supercharger for GS430
#1
Thread Starter
Lexus Champion
iTrader: (10)
Joined: Aug 2008
Posts: 3,732
Likes: 11
From: somewhere CA
Greddy Supercharger for GS430
I planned on installing my Greddy Supercharger on the 2GS after I rebuild my engine. Well, none of that came to fruition and will have to part with the supercharger. It's designed for the 3rd Generation GS. It's used part that was pulled out from the 3GS. It's a root type supercharger that sits on top of you intake manifold.
Sales As-Is basis. Whatever Greddy sent to me is what you will get. I never installed it and it's been sitting in the box for a few years now.
PM me if interested.Selling. $4k
Sales As-Is basis. Whatever Greddy sent to me is what you will get. I never installed it and it's been sitting in the box for a few years now.
PM me if interested.Selling. $4k
Last edited by sam430; 05-05-13 at 06:33 PM.
#5
Thread Starter
Lexus Champion
iTrader: (10)
Joined: Aug 2008
Posts: 3,732
Likes: 11
From: somewhere CA
This is for the V8. It replaces the whole intake manifold. You would be better off building from scratch....that would cost way too much.
here is the install instruction: https://docs.google.com/file/d/0B8cF...MbV98wO&hl=en#
click "download anyways" when you see the virus warning. Basically, google drive says that to cover their ***. Who knows, the gs400 on your profile might work. The intakes could be the same except maybe the pulleys are located differently. The 2nd generation gs400 and 430 is almost the same but different enough where you may have to fabricate parts to make the belt fit. Not sure if the ECU is the same because it does come with Emanage Ultimate that connects to the ECU.
I posted quite a few pictures on the 2nd gen forum. It looks like this... of course, not all shiny like it.
Here are the goods:
comes with wire harness, emanage ultimate, intake, supercharger and whatever else that was given to me.
here is the install instruction: https://docs.google.com/file/d/0B8cF...MbV98wO&hl=en#
click "download anyways" when you see the virus warning. Basically, google drive says that to cover their ***. Who knows, the gs400 on your profile might work. The intakes could be the same except maybe the pulleys are located differently. The 2nd generation gs400 and 430 is almost the same but different enough where you may have to fabricate parts to make the belt fit. Not sure if the ECU is the same because it does come with Emanage Ultimate that connects to the ECU.
I posted quite a few pictures on the 2nd gen forum. It looks like this... of course, not all shiny like it.
Here are the goods:
comes with wire harness, emanage ultimate, intake, supercharger and whatever else that was given to me.
Last edited by sam430; 12-17-12 at 02:16 AM. Reason: updated with pic
#6
This is the same blower kit that Passnu2 had for his GS430.
Ive seen these up close. Nice fitment, really good quality.
I think there is one for sale in the LS forums right now too.
Is everyone sure there are only 3 of these made?
Ive seen these up close. Nice fitment, really good quality.
I think there is one for sale in the LS forums right now too.
Is everyone sure there are only 3 of these made?
#7
unfortunately dude isnt gonna get $6500 for that thing, new or not....
i think we were all under the understanding that there was only 3 ever actually produced but i guess only greddy could truthfully confirm this. i want that intake manifold to build my own SC but i guess i would take the whole kit.....headed to the store to buy some scratch offs
Trending Topics
#9
Thread Starter
Lexus Champion
iTrader: (10)
Joined: Aug 2008
Posts: 3,732
Likes: 11
From: somewhere CA
I helped Passnu2 get some of the parts. I believe Passnu2 only had the intake manifold. Mine's the original and comes with Adapters, fasteners, Harness, pre-programmed emanage ultimate (I don't think anyone else have this), pulley, etc...
so, yes, I believe there is only 2 out there. Mine came off the actual car. If I laid out the parts, you will see a lot more parts than anyone else.
so, yes, I believe there is only 2 out there. Mine came off the actual car. If I laid out the parts, you will see a lot more parts than anyone else.
Last edited by sam430; 12-17-12 at 12:13 PM.
#10
I helped Passnu2 get some of the parts. I believe Passnu2 only had the intake manifold. Mine's the original and comes with Adapters, fasteners, Harness, pre-programmed emanage ultimate (I don't think anyone else have this), pulley, etc...
so, yes, I believe there is only 2 out there. Mine came off the actual car. If I laid out the parts, you will see a lot more parts than anyone else.
so, yes, I believe there is only 2 out there. Mine came off the actual car. If I laid out the parts, you will see a lot more parts than anyone else.
But if you have all the tuning stuff and harnesses. Then this is the one to get.
#11
Yup his kit is full, I had the only other "bolt on" kit out there thanks to the OP. I was missing only a few parts and had them fabricated.
3gen GS430 owners just install and drive nothing else is needed
As for the kits there was only three, Sam's being complete and mine almost. The last kit is/was just the manifold and blower that had to be re-sized to work/fit the GS.
Neurocity time to sell the h & pick up a GS430 & this kit
Seller is awesome to deal with
GLWS
Edit: stand corrected so there are 4 out there, 2 being complete, mine was only missing a few brackets and the pulley (yes it was authentic), and one more that is just the manifold & TRD blower that is not a direct bolt on.
So I had the missing brackets made from aircraft aluminum, stronger then the original brackets. Still sad I never got to at least try it after all that work....
3gen GS430 owners just install and drive nothing else is needed
As for the kits there was only three, Sam's being complete and mine almost. The last kit is/was just the manifold and blower that had to be re-sized to work/fit the GS.
Neurocity time to sell the h & pick up a GS430 & this kit
Seller is awesome to deal with
GLWS
Edit: stand corrected so there are 4 out there, 2 being complete, mine was only missing a few brackets and the pulley (yes it was authentic), and one more that is just the manifold & TRD blower that is not a direct bolt on.
So I had the missing brackets made from aircraft aluminum, stronger then the original brackets. Still sad I never got to at least try it after all that work....
Last edited by passnu2; 12-17-12 at 01:22 PM.
#14
here is the install instruction: https://docs.google.com/file/d/0B8cF...MbV98wO&hl=en#
from some research online, bout halfway down the page
http://www.jdm-option.com/eng/featur...tas2007_9.html
it claims
"Using an Eaton type MP90 supercharger unit, this kit was designed for the Celsior and Majesta line of vehicles. More power and torque can be experienced at any power band, and 345 horsepower can be extracted at its peak. Along with the kit comes a set of 660 injectors, and an eManage system."
i figure this is RWHP though so maybe about 380-415 flywheel power. front mount intercooler,headers,intake,exhaust i would think should easily make 450 WHP.
more research here
http://www.trust-power.com/06new/e20...r_charger.html
shows it makes 250.4 kilowatts so about 336 hp
second off go away.....your not getting this SC from me also to install, remove and sell lol
Sam, i keep coming back in here and studying this, what else is needed for install? box picture isnt clear, what all comes with this?
attached is my Fav pic of this installed
Last edited by sakataj; 12-18-12 at 01:06 PM.