Bought a few products - Started my LS430 Refreshing
#17
Thread Starter
Lexus Test Driver
iTrader: (9)
Joined: Jul 2010
Posts: 5,082
Likes: 196
From: toronto
I am a refinisher by trade so I do a lot of spraying, there isn't really any orange peel but I really wish I would of given it another coat of clear.
I gave it a couple light coats, and then a heavy coat, I wanted to give it a third very wet coat but my neighbors were all out watching me and it already looked good so I decided to pack it in.
Ill take some close up photos tomorrow.
Oh and in terms of sprayer I used a portable HVAC.
#20
Thread Starter
Lexus Test Driver
iTrader: (9)
Joined: Jul 2010
Posts: 5,082
Likes: 196
From: toronto
Thanks Joey !!!!! ill message u later this week im sending out that engine underpanel forsure, I have a day off on Wednesday
thanks buddy
fish eyes no , but is it as smooth as the factory finish, ehhhh not exactly.
But only a trained eye would be able to spot it , im very hard on my own work and Im quite happy with it.
When spraying outside you just need to worry about dust particles , so try to choose a day that isn't very windy and you should be fine.
and no I did a good job of taping off and I didn't have any issues with overspray which was great
fish eyes no , but is it as smooth as the factory finish, ehhhh not exactly.
But only a trained eye would be able to spot it , im very hard on my own work and Im quite happy with it.
When spraying outside you just need to worry about dust particles , so try to choose a day that isn't very windy and you should be fine.
and no I did a good job of taping off and I didn't have any issues with overspray which was great
#21
Lead Lap
iTrader: (1)
Joined: Feb 2008
Posts: 4,447
Likes: 5
From: I.E Southern California to SA,Texas
Thanks Joey !!!!! ill message u later this week im sending out that engine underpanel forsure, I have a day off on Wednesday
thanks buddy
fish eyes no , but is it as smooth as the factory finish, ehhhh not exactly.
But only a trained eye would be able to spot it , im very hard on my own work and Im quite happy with it.
When spraying outside you just need to worry about dust particles , so try to choose a day that isn't very windy and you should be fine.
and no I did a good job of taping off and I didn't have any issues with overspray which was great
thanks buddy
fish eyes no , but is it as smooth as the factory finish, ehhhh not exactly.
But only a trained eye would be able to spot it , im very hard on my own work and Im quite happy with it.
When spraying outside you just need to worry about dust particles , so try to choose a day that isn't very windy and you should be fine.
and no I did a good job of taping off and I didn't have any issues with overspray which was great
You did a great job considering the fact you had no cover or garage and on the side of the road! Props man looks good!
Thread
Thread Starter
Forum
Replies
Last Post