SC400TT Project Car
#574
Sorry Gang...We decided to change the placement of the MAF and the BOV...Probably ready tomorrow. Here are the pics of the rotors for my car, and the V8TT emblem in rough stage, not polished or powdercoated yet...
Cross-Drilled Rotor is my choice
Different angle
V8TT before finishing
Another
Last one
Ryan
Cross-Drilled Rotor is my choice
Different angle
V8TT before finishing
Another
Last one
Ryan
#579
I guess you haven't been reading this thread...Go back and search, and you will find quite a bit of info in this thread on this subject...But, the answer is Piggy Back.
Ryan
Ryan
#581
You have any magazine editors standing at your garage door yet ?!? The trails and tribulations gone thru in the work youve done to your car were well documented (or so this thread has lead me to believe) You will be carrying a great story with this car for a long time, to me thats what its all about..that and of course hearing a BOV on a toyota V8...very cool.
Ryan
#582
#584
An update
Gang:
We ran into a few problems...All due to the fact that the previous two shops had removed parts that there were no earthly reasons to remove... Unbelieveable!! There were three parts missing from my car....So, we have had to address this and are delayed...
I will tell you that Frank got the car running smoothly, and the idle was perfect. He then revved up the engine while I was on the phone..unbelieveable, and what I heard sounded monstrous and wonderful...music to my ears...
Frank is cleaning up the mess and dealing with the delay...Hopefully, this will be done by this weekend.
Ryan
We ran into a few problems...All due to the fact that the previous two shops had removed parts that there were no earthly reasons to remove... Unbelieveable!! There were three parts missing from my car....So, we have had to address this and are delayed...
I will tell you that Frank got the car running smoothly, and the idle was perfect. He then revved up the engine while I was on the phone..unbelieveable, and what I heard sounded monstrous and wonderful...music to my ears...
Frank is cleaning up the mess and dealing with the delay...Hopefully, this will be done by this weekend.
Ryan
Last edited by SC400TT; 09-08-06 at 04:41 AM.