Nazar's GS300 2JZGTE PROJECT Wicked CAS Build.
06-10-07, 08:57 AM
#35
Pole Position
Thread Starter
Join Date: Feb 2007
Location: NH
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Well, We have been working on the body kit. Got a kit from a company we work with and it may as well have been for a civic, because it fit like crap. They also sent me the wrong side skirts. So after gettingthe right side skirts and completely modifying the front bumper we now have it fitting pretty good. Rear bumper was also messed up so we had to cut the edge and refiberglass all the lip that attaches to the body of the car.
Good news though we are now making a front grill for the gs. the first one on the car will be one off but if there is enough interest we might make more.
Turbo kitis in. But waiting for a T-61 to replace the one I have, had a little roo much lag. What I have now is the equivelant of a T-57.
E-manage is all wired up, But I had to get the software and cable to get it tuned for tis car. The tune that came with my used E-Manage was from a MR-2 so the car did not run good. It is disconnected at this moment.
The exhaust is done, I went with 2 Magnaflow mufflers and had pipes made at Meineke. They did a good job. All 3" piping with very afew bends.
More will come as we get more accomplished.
Good news though we are now making a front grill for the gs. the first one on the car will be one off but if there is enough interest we might make more.
Turbo kitis in. But waiting for a T-61 to replace the one I have, had a little roo much lag. What I have now is the equivelant of a T-57.
E-manage is all wired up, But I had to get the software and cable to get it tuned for tis car. The tune that came with my used E-Manage was from a MR-2 so the car did not run good. It is disconnected at this moment.
The exhaust is done, I went with 2 Magnaflow mufflers and had pipes made at Meineke. They did a good job. All 3" piping with very afew bends.
More will come as we get more accomplished.
06-11-07, 08:28 AM
#38
Lexus Champion
07-14-07, 01:27 PM
#39
Pole Position
Thread Starter
Join Date: Feb 2007
Location: NH
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Update
The car is now finally getting ready to paint, We got the Bumpers, side skirts, Mirrors and handles painted last night, Next friday night is the Full car... Then starts the fun part put the interior back in...
Here are some pictures.
Last edited by Nazar; 07-14-07 at 01:30 PM.
07-15-07, 07:03 AM
#41
Pole Position
Thread Starter
Join Date: Feb 2007
Location: NH
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Polyprimer, And Dupont paint.. Color is the original color just will be All White... The It is very cool under certain lighting it loosk silver, But under sunlight it looks pearl white...
