self built 800rwhp project sc300
#93
Rookie
Thread Starter
Join Date: Sep 2008
Location: nj
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
i also have one more aeromotive eliminator pump under the aluminum plate that turns on at 10 psi and the aeromotive fuel pump controller. ill take new pics soon. i tried to put more wight on the passenger side for better wight distribution.
#96
here is my wight reduction list
carbon fiber hood
carbon fiber doors
rear bumper support
front bumper support
removed all sound dampening
no heater core ( I can fit a bottle of nos there now) heavy
no spare, jack, cd changer, tool kit, first aid kit
stock fuel tank replaced with an 20 gallon aluminum fuel cell ( big weight saver)
cut out where the spare goes and used an aluminum plate
single hks titanium 4 inch down pipe back ( big weight saver)
replaced stock seats with two racing seats that combined weight is 60lbs with brackets
a/c completely removed ( this removes alot of lbs)
power steering completely removed
coilovers ( this upgrade removed at least 20lbs)
no charcoal canister
removed all seat belts
removed all air bags
light wight big front calipers kit
lighter intake manifold
lighter radiator
lighter pulleys
turbo manifold is lighter then stock cast iron tt manifold
removed all heat shields
lighter steering wheel
lighter do-luck wheels
no trunk carpets
all carbon will be painted black to keep the sleeper look.
carbon fiber hood
carbon fiber doors
rear bumper support
front bumper support
removed all sound dampening
no heater core ( I can fit a bottle of nos there now) heavy
no spare, jack, cd changer, tool kit, first aid kit
stock fuel tank replaced with an 20 gallon aluminum fuel cell ( big weight saver)
cut out where the spare goes and used an aluminum plate
single hks titanium 4 inch down pipe back ( big weight saver)
replaced stock seats with two racing seats that combined weight is 60lbs with brackets
a/c completely removed ( this removes alot of lbs)
power steering completely removed
coilovers ( this upgrade removed at least 20lbs)
no charcoal canister
removed all seat belts
removed all air bags
light wight big front calipers kit
lighter intake manifold
lighter radiator
lighter pulleys
turbo manifold is lighter then stock cast iron tt manifold
removed all heat shields
lighter steering wheel
lighter do-luck wheels
no trunk carpets
all carbon will be painted black to keep the sleeper look.
#97
Rookie
Thread Starter
Join Date: Sep 2008
Location: nj
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
a 8 point chrome moly roll cage. but first i want to weigh the car. but waiting for the carbon fiber trunk, fenders then the cage will go in. then ill get the new color will go on the car. i havent been working on the car for the last few days because ive been working on a customers 2jzge intake manifold.
Last edited by titoracing; 01-19-09 at 05:12 PM.