RyanV

iTrader: (9)

Man, it look's fantastic.

That must have sucked moving the picker around on the loose gravel!

slappy96

Thanks Ryan. I appreciate the kind words.
I will never ever deal with a pebble driveway again. Period.

boostin300

Clean build man, looks great.

slappy96

Thanks! Just waiting on the transmission output flange and we'll be in business.

7sins

will you be putting your car on the dyno? I'm very curious to see what kind of power you put down. Are you using stock Aristo injectors or USDM or aftermarket?

Awesome thread BTW

b00stfed

very nice build and clean car...im looking to pick up my own sc300 as we speak..

ICONYQ

iTrader: (3)

Nice work. I need to get my pics loaded of mine. I should be coming to an end within a week or so. Can't wait to see what those turbo do.

slappy96

Thanks man. I will eventually get it on the dyno, but I don't have any firm plans yet. Injectors are stock Aristo.

slappy96

Thank you. Yes, lets see some pics.

As for the turbos, I am anxious too. With the combo of JDM cams, map sensor, USDM manifold-exhaust bypass pipe, downpipe no cats and 12 bladed upgrades I have no idea of the horsepower. I am guessing 350 ish at 9-10 psi. I think 450 will be a realistic goal with different injectors and a boost controller later on. Stu Hagen twins are good for 20-22 psi but I won't be near that for a while. With the effort I've put into this, I also won't be near 16psi+ on pump gas.

slappy96

Thanks. Get an SC ASAP. 17 years and I think I enjoy it more now than when it was new. FL licensed ftw.

BAD954BOI

iTrader: (5)

I want video.....!!!!
Lol...

CrackerJac

Awesome build!

howat

Masterful.

Thx for sharing.

slappy96

Thanks for the comments. I've been on vacation. Getting back to work on the car tomorrow night. Plans are to turn the key Sat. Fingers crossed.

slappy96

I can't even believe it myself. I primed the engine and turbos for 45 sec, put in the EFI fuse and started on the first shot. Idles and sounds extrodinary with the supra downpipe and dual exhausts. Much more to follow...