VIP inspired Soarer build project.
#16
Driver
Thread Starter
Join Date: Sep 2007
Location: BC
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
I am going for the Vertex style kit like most of the guys here!!
On that picture I have 20mm spacer in the rear and 5mm in the front. They fit alright with stock body. No fenders modification ever. Sizes are 16x8 +30 with 205/60R16
Yup, Vertex style it is. I like the stock look but I just want to stand out as there are not much kitted SC locally.
On that picture I have 20mm spacer in the rear and 5mm in the front. They fit alright with stock body. No fenders modification ever. Sizes are 16x8 +30 with 205/60R16
Yup, Vertex style it is. I like the stock look but I just want to stand out as there are not much kitted SC locally.
#21
Driver
Thread Starter
Join Date: Sep 2007
Location: BC
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Some of the wheels I imported before.
18x10 +15 Buddy Club P-1 QF
18x10 +0 18x11 +0 Work VS-KF
18x9 +10 18x10 +10 Weds Kranze
18x10.5 -15
18x12 -15 Work Equips
The VS-KF are my favorite and I regret I selling them..
#22
Hacked CL to become a Mod
another one from BC!!! BC is quickly becoming SC country...sick ride, I saw this from the previous post.
did you sell your old front bumper? I'll be willing to take the lip if you still have it
did you sell your old front bumper? I'll be willing to take the lip if you still have it
#23
Driver
Thread Starter
Join Date: Sep 2007
Location: BC
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
I gave the bumper to my friend. If you want the lip, go PM JDMes as I gave the bumper to him for helping me installing the kit. I believe he wants to sell it!!!
BTW, the MKIII supra in your sig, is the name of the owner Kenny????? I think I sold those rims to him!! hehe
BTW, the MKIII supra in your sig, is the name of the owner Kenny????? I think I sold those rims to him!! hehe
#25
Hacked CL to become a Mod
haha yes...small world
#29
Driver
Thread Starter
Join Date: Sep 2007
Location: BC
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Dec 8th Update
More pic's of the car After the kit installed. It is a Vertex Style kit from my body kit supplier. It generally fit decent. I need to trim the high beam area which it doesn't fit very well. The side skirt is also 5mm too short overall but I fixed it with some trimming. I also flare out the sideskirt and rear lip to compensate my sticking out wheel fitment. Car was raised half an inch all around so the body kit will not be touching the ground. I still need to raise 1/8 of an inch at the front since the side skirt is only 1.5 inches off the ground.
I am still looking for a 97+ grille and fogs so if anyone have one, please pm me!!!
I also made an appointment to get all the body work done this saturday. After that, car will be ready for paint. I will keep you guys posted.