teaser; with unknow finish date???
#47
Pole Position
Join Date: Mar 2010
Location: California
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
SC51, no it's just a indeed cup holder from car mate. Has that VIP table feel to it and I needed a passenger side cup hold since the factory one hits my screen on my deck.
BigGreen, The old equips were 18x8.5 +11 on 215/40/18 and 18x10 +18 on 225/40/18 and the new amistads are 19x10 -18 and 19x10 -28 on 225/35/18.
------------------------------------------------------------------------
NVM, i just found the answers to both my questions, and now feel like a douche. your car was just too attractive to read any further into the thread i guess.. hahah.
but still.... MOAR PICTOAR of BEFOAR and AFTOARzzzz
BigGreen, The old equips were 18x8.5 +11 on 215/40/18 and 18x10 +18 on 225/40/18 and the new amistads are 19x10 -18 and 19x10 -28 on 225/35/18.
------------------------------------------------------------------------
NVM, i just found the answers to both my questions, and now feel like a douche. your car was just too attractive to read any further into the thread i guess.. hahah.
but still.... MOAR PICTOAR of BEFOAR and AFTOARzzzz
#48
Pole Position
Join Date: Mar 2010
Location: California
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
actually, i still have a question about the cupholders. lol. how did you mount them? because during my breif research for them, people have said they mount in the window frame. and apparently the mounting pieces are like so:
http://www.luxuryjcars.com/forums/in...showtopic=1437
but yours are facing the other direction, which means you can either move the mounters, or you stuck them in the air vents or what?
please let me know, i like how yours are facing much better than sideways!
http://www.luxuryjcars.com/forums/in...showtopic=1437
but yours are facing the other direction, which means you can either move the mounters, or you stuck them in the air vents or what?
please let me know, i like how yours are facing much better than sideways!
#49
Pole Position
Join Date: Mar 2010
Location: California
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
also, these are the only ones I can find for sale. do you think these are legit? or are they knockof/**** quality? they are coming from Japan so they MUST be JDM tyte right? lol. any input appreciated.
http://cgi.ebay.com/ebaymotors/JDM-C...#ht_1968wt_939
http://cgi.ebay.com/ebaymotors/JDM-C...#ht_1968wt_939
#53
Pole Position
Join Date: Mar 2010
Location: California
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
^^ the fact that it's mounted an inch higher really doesn't "highlight" that to anyone but us aficionados.. it still looks mad sexy. I'd trade it for my setup in a heartbeat!
#54
Driver
Thread Starter
Join Date: Sep 2008
Location: ca
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
fenderub, Thanks. I'm on UAS so if it goes up it can come right back down.
masagsxr, Heres a pic of the said tool. I just kept studying the ones I saw on yahoo Japan. Me and my pops realized there wasn't ***** to them and came up with this. All Home depot.
Forte EXE, They are just the fleabays I was going to do a custom number with the factory lights, just never go around to it.
vinh, I still have them. I might sell them, just haven't decided on a price yet.
SC570, I might have miss worded. Sorry. I did use a roller. But the backs were a little more complicated then that. The outer fender and inner fender spread apart as you get higher. We had to hammer the inner fender to a point where the 2 touch with out dimpling the outer. other wise you will never pull that high. roller just doesn't have the strength. But that's only a issue if you go this far. If you good with a hammer and dolly its not that bad. we also hit a point where the roller just wouldn't pull any more and had to finish the outer lip with a pipe. then stuffing news paper on top of the tire and dropping the car. Every trick in the book was used on the rears! The pull really don't look that far with the pic's but here something to give you an idea and thanks, that's the look I was going for here. I'm going for that VIP style and always loved the way they pull the ***** out of the fenders and camber the crap out of the wheels.
4" up where the taper starts to roll out.
SCrollinSD, I almost sold mine last year. I Was going to buy a Q45 or a LS430. I bought the rims with one of those cars in mind. I don't really have a whole lotta pic's. The only reason I have a few was we had just finished the UAS that day. My friends have pic's but I don't. If you buy the cup holders brand new they come with both vent and door holders. I don't want to bad mouth but I would never pay that much for that holder. I think mine was like 20 to 25 bucks. What part of cali you from ? I got mine in Japan town in San Fran. There's a market in Irvine that has them as well, or little tokyo in LA.
phamln, Yeah I got burnt on those. Or should I say SC owner's got the ***** end on that. I bought them on yahoo japan through a auction service. In the picture the replace the front of the mirror but that was for another aplication. for Jzz30 owners it's just a cap that you put over the mirror. They look good at night when signaling but if you look close you can tell there just caps. they have grown on me and where just to damn expensive to not use.
masagsxr, Heres a pic of the said tool. I just kept studying the ones I saw on yahoo Japan. Me and my pops realized there wasn't ***** to them and came up with this. All Home depot.
Forte EXE, They are just the fleabays I was going to do a custom number with the factory lights, just never go around to it.
vinh, I still have them. I might sell them, just haven't decided on a price yet.
SC570, I might have miss worded. Sorry. I did use a roller. But the backs were a little more complicated then that. The outer fender and inner fender spread apart as you get higher. We had to hammer the inner fender to a point where the 2 touch with out dimpling the outer. other wise you will never pull that high. roller just doesn't have the strength. But that's only a issue if you go this far. If you good with a hammer and dolly its not that bad. we also hit a point where the roller just wouldn't pull any more and had to finish the outer lip with a pipe. then stuffing news paper on top of the tire and dropping the car. Every trick in the book was used on the rears! The pull really don't look that far with the pic's but here something to give you an idea and thanks, that's the look I was going for here. I'm going for that VIP style and always loved the way they pull the ***** out of the fenders and camber the crap out of the wheels.
4" up where the taper starts to roll out.
SCrollinSD, I almost sold mine last year. I Was going to buy a Q45 or a LS430. I bought the rims with one of those cars in mind. I don't really have a whole lotta pic's. The only reason I have a few was we had just finished the UAS that day. My friends have pic's but I don't. If you buy the cup holders brand new they come with both vent and door holders. I don't want to bad mouth but I would never pay that much for that holder. I think mine was like 20 to 25 bucks. What part of cali you from ? I got mine in Japan town in San Fran. There's a market in Irvine that has them as well, or little tokyo in LA.
phamln, Yeah I got burnt on those. Or should I say SC owner's got the ***** end on that. I bought them on yahoo japan through a auction service. In the picture the replace the front of the mirror but that was for another aplication. for Jzz30 owners it's just a cap that you put over the mirror. They look good at night when signaling but if you look close you can tell there just caps. they have grown on me and where just to damn expensive to not use.
#55
Pole Position
Join Date: Mar 2010
Location: California
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
^^ word. thanks for the heads up! i did not and will not order from there, I'll keep lookin. if you ever wanna sell one of em hit me up! :P
fine then... MOAR AFTOAR PICTOAR!!!
fine then... MOAR AFTOAR PICTOAR!!!
#58
Pole Position
Join Date: Mar 2010
Location: California
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
do you have any night shots of the headlight ouput? or could you take some? I like how they look during the day, but if they kill output or just look cheesy I might not get them.
they are these right?
http://cgi.ebay.com/Toyota-Lexus-Soa...#ht_2772wt_939
with these highs?
http://cgi.ebay.com/Toyota-Lexus-Soa...#ht_1851wt_939
they are these right?
http://cgi.ebay.com/Toyota-Lexus-Soa...#ht_2772wt_939
with these highs?
http://cgi.ebay.com/Toyota-Lexus-Soa...#ht_1851wt_939
#59
Driver
Thread Starter
Join Date: Sep 2008
Location: ca
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Yeah those are the ones. Hard to say about light out put. I put HID's in both high and low when I got em, and well there not made for HID. If I take a night shot there will be glare, unless I take it with only running lights. They are not as adjustable as stock that's for sure, but I have yet to get flashed for my lights being to bright so must be alright.
Not a up date but I took the car out today! Took it to my uncle's shop to start planing my custom exhaust and get some advice on the messed up fender.
Not a up date but I took the car out today! Took it to my uncle's shop to start planing my custom exhaust and get some advice on the messed up fender.