Scarface VIP project!
05-22-11, 11:38 AM
#346
Pole Position
Join Date: Jul 2010
Location: Amarillo, Texas
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
06-02-11, 03:01 PM
#347
okay so this is what i have been working on. the stance is far from done but all i need now are some front UCAs to lay the front wheels down and that should finish the front fitment. i will be aiming to match up the fender and the rim lip. please keep in mind stance is a work in progress. :biggthumpup:
current specs are:
18x10.5 et+10
manufacturer lower camber settings at zero
current camber off of the alignment machine -7.52 at the front!
http://www.flickr.com/photos/cadiluv...7626861754126/
BEFORE.
THE NIGHTPAGER 30MM RCAS
NIGHT PAGER 30MM RCAS vs. STUDIO 1.5 INCH/ 35MM CAMBER RCAS
THE SWITCH UP
THE NEW RCAS INSTALLED
i chose to use the stock bolts to the spindle with pressure washers!
AFTER
current specs are:
18x10.5 et+10
manufacturer lower camber settings at zero
current camber off of the alignment machine -7.52 at the front!
http://www.flickr.com/photos/cadiluv...7626861754126/
BEFORE.
THE NIGHTPAGER 30MM RCAS
NIGHT PAGER 30MM RCAS vs. STUDIO 1.5 INCH/ 35MM CAMBER RCAS
THE SWITCH UP
THE NEW RCAS INSTALLED
i chose to use the stock bolts to the spindle with pressure washers!
AFTER
06-09-11, 09:23 PM
#355
from my blog..
"although i LOVE doing things to the GS i must admit that i feel relieved that it will almost be SATISFACTORY enough for this season! SCARFACE has definitely come a long way in very short period of time. actually way faster than i would like to admit. but soon enough i will just be able to sit back and enjoy all the effort that has been put into this build.
here’s a list of the few minor details still remaining before i can JUST chill and cruise!!
-Junction Produce Billet Grill (thank you Fizz Chicago)
-REpaint the hood (after the ****ed it up the day after i got it back from paint) and install color matched window visors (thank you PLATINUM VIP)
-Tinted headlights (thank you Lux VIP)
and i am probably forgetting something but its probably not important =/
i also want to thank all people who supported the build along the way! you know who you are!!! THANK YOU!"
"although i LOVE doing things to the GS i must admit that i feel relieved that it will almost be SATISFACTORY enough for this season! SCARFACE has definitely come a long way in very short period of time. actually way faster than i would like to admit. but soon enough i will just be able to sit back and enjoy all the effort that has been put into this build.
here’s a list of the few minor details still remaining before i can JUST chill and cruise!!
-Junction Produce Billet Grill (thank you Fizz Chicago)
-REpaint the hood (after the ****ed it up the day after i got it back from paint) and install color matched window visors (thank you PLATINUM VIP)
-Tinted headlights (thank you Lux VIP)
and i am probably forgetting something but its probably not important =/
i also want to thank all people who supported the build along the way! you know who you are!!! THANK YOU!"
06-13-11, 07:03 AM
#357
Hell yes! Cuban, any news if the rca's are going to be for sale or are these one-offs? I bought a set of night pager's to build my own rca's and I have been designing pretty much what your new rca's have accomplished: I am like 800 in R&D at this point for custom RCA's, so I rather desist if the STUDIO 1.5 INCH/ 35MM CAMBER RCAS are going to be for sale for 1stgen GS3.... at least I know more about machining and 3d modeling than before...
06-13-11, 09:48 PM
#358
the specific set i installed in the pics is currently for sale! i went with a set a quarter inch smaller because my wheels are already 18x10.5et+10 up front. if you have facebook hit me up and i can link you to the STUDIO page!
@ Chris Cuban GS
@ Chris Cuban GS
