HyperMKIV

iTrader: (1)

thanks guys!!!

ok... since there's another thread asking about the puddles lights in the bottom of the side mirrors, i decided to make a quick DIY on this... specially since i had some LED's lying around. i completely forgot to take pics of the actually LED's i used...

anyway... so i moved both mirrors so they're facing all the way up... top all the way back and bottom all the way out... then i used my hands...no tools... to pry the corners closest to the doors...

http://www.youtube.com/watch?v=yF9_qo6kYuk

http://www.youtube.com/watch?v=QN33Tp763zw

then take out the 4 screws:


after you take out the 4 screws, the 2 housings will peel away from each other...
there's 3 tabs... one on the bottom and two on the sides closest to the car...then you'll see this:


take out the bulb from the housing and replace:


here's the units i replaced those with... (got them off amazon and the title was: 194 168 T10 Wedege SMD High Power LED HYPER WHITE BULBS Dome Lights 12V)


here's the finished result:
http://www.youtube.com/watch?v=K1CB8...ature=youtu.be

HyperMKIV

iTrader: (1)

sure thing...

thanks!!! and this is norcal...



thanks!!!

Nat

iTrader: (1)

Thanks, Carey. I tried pulling mine from the bottom and now know why it doesn't work.
What size Led is that?

HyperMKIV

iTrader: (1)

i edited my post and i got it form amazon...
the title is: 194 168 T10 Wedege SMD High Power LED HYPER WHITE BULBS Dome Lights 12V

HyperMKIV

iTrader: (1)

i also did a rear seat removal vid for our cars... a bunch of us have the reclining seats so they're not as easy to remove as the regular ones so i decided to make a vid of how to remove them. i'll post them here for reference if anyone needs this info...

http://www.youtube.com/watch?v=CyZy8vQZ7e8

http://www.youtube.com/watch?v=11vT1BY-ssg

http://www.youtube.com/watch?v=-dCkAzqM5UU

let me know if u guys need any help...

CJITTY

great videos!! thanks for taking the time to do that. So on the seat back removal, it was hard to tell in the video, but are the strut tower bolts visible at that point or are there more steps required to get to those? Looks like my Tanabe spring install wont be so hard after all..the back seats were my biggest concern

I8ABMR

Thanks for posting the videos. That was really cool of you. You just keep making me want to drop my car. Your car is gorgeous

HyperMKIV

iTrader: (1)

thanks...haha...

after you take the seat off there's a few tabs to pop off...
then you'll see the towers under the rear dash...

too bad i forgot to take pics... but it's very straight forward after taking the seats off...

CJITTY

Great, thank you very much! Now, just need to decide if I want to put lowering springs on this car..dammit, why didnt I get L with Air?

HyperMKIV

iTrader: (1)

ever thought about coilovers instead of just springs???

we put on a bunch of coilovers and the guys over here love them!!!

IS-SV

I know I'm not supposed to be in this section, but I just had to take a look at this LS.

Nat

iTrader: (1)

How many modified LS460 are there is NorCal? I recall only seeing your and Synergy.

HyperMKIV

iTrader: (1)

HAHA... thanks for looking...

1 silv one on bags, 22's and wald kit
3 silv ones on coilovers with 22's
1 grey one on coilovers, 22's and wald kit

and a few i haven't seen yet...

Nat

iTrader: (1)

Sweet...more than I thought. You can add me to the list...just haven't meet you guys yet. Hopefully at BOS.

White on Data System OEM air, 22's and INGS/Wald kit.

cheez80

iTrader: (1)

just curious, but are you running a mixture of ings and wald aero pieces? also, what setting is your controller set to?