project:Soarer
#437
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
so nothing much has been going on. some how I uploaded a damn supra map and messed up my pre-loaded 1jz download. i got another map from a member on club lexus. but still won't let me send the map over to the ecu. i really haven't had time to **** around with the aem fully. but hopefully i will get some time after the 9th. and iam going to review all these videos.
anywhoo i ordered a aftermarket ijz intake. i figured since it wasn't that expensive i would take the plunge.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani1_zps84378a0e.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani2_zps932de158.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani3_zps092fe7a1.jpg)
haven't had a chance to see if the runners match up perfectly or if i need to port them. but other than that it is very light. and has some shavings that needs to be cleaned out. i do like the runners tho.
apparently in china the work is really cheap.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani4-billofsale_zps7110693f.jpg)
$25.00 to make, well blow-me-job!!
anywhoo i ordered a aftermarket ijz intake. i figured since it wasn't that expensive i would take the plunge.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani1_zps84378a0e.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani2_zps932de158.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani3_zps092fe7a1.jpg)
haven't had a chance to see if the runners match up perfectly or if i need to port them. but other than that it is very light. and has some shavings that needs to be cleaned out. i do like the runners tho.
apparently in china the work is really cheap.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jzmani4-billofsale_zps7110693f.jpg)
$25.00 to make, well blow-me-job!!
#438
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
so next up was a q45 throttle body(or so i thought). after securing one i later found out that it's not a true 90mm.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/damnq45wontfit_zpsd54b66fa.jpg)
i think dr. web says it's really 87mm. either way i brought another aftermarket one that you can see the size difference.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/comparotothenewtb_zps49becc6c.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/tbcomparo2_zps9fe45034.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/tbcomparo3_zpse8cc23a1.jpg)
the new tb comes with a flange for an exact fit on the mani
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/tbflangecomparo_zpsb93eb634.jpg)
luckily iam going to need that as the original flange bolts don't line up perfectly(just one).
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/newtbonnewmani_zps1ae36c86.jpg)
but spending a couple more bucks is expected with this kind of stuff and not really a big deal imo.
i was shocked to see the premium that q45 tb's bring nowadays. they didn't used to go for 100.00.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/damnq45wontfit_zpsd54b66fa.jpg)
i think dr. web says it's really 87mm. either way i brought another aftermarket one that you can see the size difference.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/comparotothenewtb_zps49becc6c.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/tbcomparo2_zps9fe45034.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/tbcomparo3_zpse8cc23a1.jpg)
the new tb comes with a flange for an exact fit on the mani
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/tbflangecomparo_zpsb93eb634.jpg)
luckily iam going to need that as the original flange bolts don't line up perfectly(just one).
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/newtbonnewmani_zps1ae36c86.jpg)
but spending a couple more bucks is expected with this kind of stuff and not really a big deal imo.
i was shocked to see the premium that q45 tb's bring nowadays. they didn't used to go for 100.00.
#439
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
and finally i got ready to get some good head!!!
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/readyforsomehead_zps0715806e.jpg)
got these puppies to service my leaky valve stem seals. just going to remove the head and maybe get a head job(leaning towards it). and finish up the mods with some 264 bc cams.
what about the fuel you say?? well i already got a top feed rail and these babies.
http://www.ebay.com/itm/191066482552...84.m1439.l2649
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/readyforsomehead_zps0715806e.jpg)
got these puppies to service my leaky valve stem seals. just going to remove the head and maybe get a head job(leaning towards it). and finish up the mods with some 264 bc cams.
what about the fuel you say?? well i already got a top feed rail and these babies.
http://www.ebay.com/itm/191066482552...84.m1439.l2649
#441
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
A lot of us frown at items made in China. Not everything made in Asia is bad or low class. We have that mentality that if it is cheap it is bad. Not always. The reason why stuff from China or 'Asia is cheap , it is because labor cost is cheap. China has one of the cheapest labor cost.
Average monthly salary of an individual in China is $160-200 . Why do you think most of our greedy big corporations instead of keeping the jobs here in the US , set up their manufacturing plant in China or their customer relations service center in Asia ? It is all about cheaper manpower cost so their company bottom lines ($$$) are higher.
#447
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
One thing I remember on the ATI or Titan Dampener , I have both but are basically identical, they are tough to put in and get out
![Egads!](https://www.clublexus.com/forums/images/smilies/pat.gif)
Also on the ATI dampener , the first one I bought from Summit was not right, they have different models for the Toyota 3.0 . When I was getting the whole rotating assembly balanced before the engine assembly, I was told by the machine shop that what I got was not right so I had to go back to Summit Racing to get it exchanged. After that I never had problem installing and removing those Dampeners. You got to have the right tools.
Last edited by gerrb; 03-05-14 at 01:17 PM.
#450
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
so, been a while, scored some 880cc bosch injectors.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jz800ccs_zps62321db0.jpg)
scored some tt supra center caps
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/finallycappedup_zps412ea109.jpg)
and got some bc cams 264's.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jz264cams1_zps1e61ba23.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1js264cams2_zpsbd085370.jpg)
and finally got the aem started, you need to bypass the fuel pump. iam looking into the relay option as I would like to have the aem control the fuel pump. when I get some damn time tho.
I need someone wo walk me through how to get the car to idle, I can get it to start but it just dies after a few seconds??
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jz800ccs_zps62321db0.jpg)
scored some tt supra center caps
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/finallycappedup_zps412ea109.jpg)
and got some bc cams 264's.
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1jz264cams1_zps1e61ba23.jpg)
![](http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20scorer%202/1js264cams2_zpsbd085370.jpg)
and finally got the aem started, you need to bypass the fuel pump. iam looking into the relay option as I would like to have the aem control the fuel pump. when I get some damn time tho.
I need someone wo walk me through how to get the car to idle, I can get it to start but it just dies after a few seconds??