LEX_MAN

iTrader: (2)

Some parts are not worth the money you spend. Its not that hard to do if you have the right tools and a garage. I only spend $10 on a used pedal and 25 for the new master. Lines and screws were about 5 so all together $40

VS
Pedal 350+ master cylinder 110 = 460

I'm sorry but 400 + is a lot of money for me,heck u can get a nice clutch upgrade for a little more labor.

megamax

iTrader: (9)

Yes this is true^. So guys what is that sensor under the pedal?

93SC300.

iTrader: (7)

I believe the wires you found under the dash are to the stock radar detector that was an option when the vehicle was purchased. I have one in my sc also that i dont use at all. I think its like a PK-1000 or something like that. Nice to have though

megamax

iTrader: (9)

Kool. Good to know this cal had all the extra options. So how and where do u get alerted when ure getting zapped using the stock rdr

DoomLight

iTrader: (3)

Lol the only stick I'm shaking is the shifter left to right to make sure its in neutral before i start it.

LEX_MAN

iTrader: (2)

I believe thats your WOT transmission kick down button, you can push it like a button.I guess at WOT it changes the tranny down to even lower gear.

DoomLight

iTrader: (3)

i tried looking for that button in the service manual. maybe i was in the wrong section

megamax

iTrader: (9)

So I need to remove this since I have a manual tranny now? Correct?

LEX_MAN

iTrader: (2)

use it as a nitrous wot switch

313sc3

This guy speaks the truth. Im a sneaker head. There is no way id pay over $600 for any pair of sneakers but i have friends that have dropped $3000!

megamax

iTrader: (9)

^^^^3k wtf!!! i didnt know they went that high?

DoomLight

iTrader: (3)

perhaps you maybe right. for me. i happen to find a SC300 manual in the junkyard. i didnt pay more than 50 bux for the complete clutch pedal assembly and that included the slave cylinder, lines, and brake pedal.

i would probably complain a little if i had to buy them new. but i'd find a way to get a discount or something. anyway. back to topic. lets see this baby get built!

megamax

iTrader: (9)

so started taking this damn bumper off. i thought it would be an hr job. the bolt diagram makes it look so easy.. well it's not going into it's 2nd day of trying to get this off tomorrow. the nights are getting colder now so my work time has been cut shorter now(sad face).

these damn clips were annoying. iam going to replace them with zipties so i don't need them




took some time out to do a side by side comparo fo the stock fogs and the odessey fogs iam gonna use. i have to do some cutting but looks like it will work...





so iam putting these stockers up for sale . uncracked or yellow. $70.00 beans plus shipping.

megamax

iTrader: (9)

so i finally finally got this damn bumper off. these plastic clips are a nightmare. iam going to replace them with the ones that actually screw in.





done with shell for now. next is get it to the car wash, and fit up a intercooler kit.

iam also selling the stock hi beam lamps. iam getting some e-nay ones instead. so letting these go for $80.00+shp.

1JZPWRD

iTrader: (59)

GL on the sale of the items. That last picture looks so familiar.. keep the pictures coming on the build thread.