1993 SC400 Build
#31
Engine bay after tuneup
Alright here it is as promised. Put on my new silicone hose techniques hoes and got rid of the dried cracked hoses that were there. Drove it to work tonight and it did real good.
#32
HEy everyone. Well it has been awhile since I have updated this thread and I have did quite a few things since working on my engine. I had a hesistation issue which I tracked down to the fuel ECU. I did this MOD for the time being.
Than I set to work on the suspension. My ball joints did not look good. SO I replaced all 4 front suspension control arms. Front left has a brand new Supra arm and the other 3 were used with minimal wear. Here are my old lowers. The tops went right into the trash.
After a lot of research I decided to build the gixxer_drew coil over setup. They ride very nice. I am not a low rider, so I set for stock height.
I must say that when I hear about people painting their interior I was very skeptical. But after seeing the results I was sold. SO I placed my order for SEM paint and set to work removing my interior. I got the dash out today. I must say this is extremly intimidating and I know it will go back together ok, but still looks like a big mess.
Till the next update guys...
Than I set to work on the suspension. My ball joints did not look good. SO I replaced all 4 front suspension control arms. Front left has a brand new Supra arm and the other 3 were used with minimal wear. Here are my old lowers. The tops went right into the trash.
After a lot of research I decided to build the gixxer_drew coil over setup. They ride very nice. I am not a low rider, so I set for stock height.
I must say that when I hear about people painting their interior I was very skeptical. But after seeing the results I was sold. SO I placed my order for SEM paint and set to work removing my interior. I got the dash out today. I must say this is extremly intimidating and I know it will go back together ok, but still looks like a big mess.
Till the next update guys...
Thread
Thread Starter
Forum
Replies
Last Post
aletz12485
Build Threads
32
07-17-17 05:22 AM