LuxuryGS3's Reintroduction/Official Build Thread
#31
Are you bypassing the amp and just using the built in amp in the Kenwood, Parker?
And yeah i'm planning on just going LED once I get my coils, so another month or so and those should be ordered/installed.
#34
Lexus Champion
iTrader: (5)
You car is making a clean transformation. "new owner, new life" hehe
good bye Scraper, Hello Vip..hehe
-If your wheel specs are 19x8 all around. Imo, I'd run a 20mm spacer on the rears. It'll look clean, aggressive.
-If you don't wanna spend too much $$$ filling holes and painting the trunk. Stop by any Vinyl/sign shop and ask em to cut out and assortment of white Vinyl circles. It should'nt cost more than $10.
good bye Scraper, Hello Vip..hehe
-If your wheel specs are 19x8 all around. Imo, I'd run a 20mm spacer on the rears. It'll look clean, aggressive.
-If you don't wanna spend too much $$$ filling holes and painting the trunk. Stop by any Vinyl/sign shop and ask em to cut out and assortment of white Vinyl circles. It should'nt cost more than $10.
#35
Thanks man I appreciate it!
Yeah you're right on that man! I had so much stuff to change out and fix once I got the car and I mean this car was neglected bad when I got it into my hands. It was a shame.
Really you think only 20 will be good? My boy was telling me to go 30 all around and roll with that. At first that's what I was thinking though. Just like 20-25.
Thanks for the info on that vinyl shop stuff man. I'll try and check one out forsure. I mean honestly i'm probably going to be dropping money to get it all painted and filled anyway, 'cause i'm just **** like that, but the white vinyl would definitely look a lot better than the puddy.
You car is making a clean transformation. "new owner, new life" hehe
good bye Scraper, Hello Vip..hehe
-If your wheel specs are 19x8 all around. Imo, I'd run a 20mm spacer on the rears. It'll look clean, aggressive.
-If you don't wanna spend too much $$$ filling holes and painting the trunk. Stop by any Vinyl/sign shop and ask em to cut out and assortment of white Vinyl circles. It should'nt cost more than $10.
good bye Scraper, Hello Vip..hehe
-If your wheel specs are 19x8 all around. Imo, I'd run a 20mm spacer on the rears. It'll look clean, aggressive.
-If you don't wanna spend too much $$$ filling holes and painting the trunk. Stop by any Vinyl/sign shop and ask em to cut out and assortment of white Vinyl circles. It should'nt cost more than $10.
Really you think only 20 will be good? My boy was telling me to go 30 all around and roll with that. At first that's what I was thinking though. Just like 20-25.
Thanks for the info on that vinyl shop stuff man. I'll try and check one out forsure. I mean honestly i'm probably going to be dropping money to get it all painted and filled anyway, 'cause i'm just **** like that, but the white vinyl would definitely look a lot better than the puddy.
#39
Lexus Champion
iTrader: (5)
Thanks man I appreciate it!
Yeah you're right on that man! I had so much stuff to change out and fix once I got the car and I mean this car was neglected bad when I got it into my hands. It was a shame.
Really you think only 20 will be good? My boy was telling me to go 30 all around and roll with that. At first that's what I was thinking though. Just like 20-25.
Thanks for the info on that vinyl shop stuff man. I'll try and check one out forsure. I mean honestly i'm probably going to be dropping money to get it all painted and filled anyway, 'cause i'm just **** like that, but the white vinyl would definitely look a lot better than the puddy.
Yeah you're right on that man! I had so much stuff to change out and fix once I got the car and I mean this car was neglected bad when I got it into my hands. It was a shame.
Really you think only 20 will be good? My boy was telling me to go 30 all around and roll with that. At first that's what I was thinking though. Just like 20-25.
Thanks for the info on that vinyl shop stuff man. I'll try and check one out forsure. I mean honestly i'm probably going to be dropping money to get it all painted and filled anyway, 'cause i'm just **** like that, but the white vinyl would definitely look a lot better than the puddy.
Idk your wheel specs/offset. But a 30mm Spacer is kinda huge imo. The spacer you pick will help you achieve the look you want. Just play around with all the sizes before you buy em. Hopefully there's a shop around your area that will let you try em all out first, so you don't get stuck with a spacer you don't want. Some things you should consider first. Like what look you want? Are gonna bring the wheels all the way out(flush)? You wanna tuck? What tire sizes, how low you wanna go with your Megans, Do you wanna cut the rear fenders, do you wanna pull the rear fenders, are you gonna roll the fronts? I'm on my 5th set of wheels and tires and my 3rd suspension, and it's this setup that makes me the happiest so far... haha
My buddy did a wing removal on his Black GS too. We just temporarily put some little black circle decals on the holes and it worked until he painted the whole car.
#41
Now all these Dallas boy showing up in these threads ,hope yall start coming out to the Lexus meets we have weekly, so I can stop being the only gs guy among all the Sc's. They starting to think us gs guys don't fix our cars up and are pre madonnas..