drewdizzle

iTrader: (4)

I think so, I haven't wired it up yet but it seems straight forward enough.

I have the injectors wired sequentially from the aem ems. so 1-6 wires go straight to the injectors. than the resistor wires don't matter which injectors they go to so 6 wires from the resistor to the injectors and 1 wire to the resistor for 12v power.

only question i have is which way the electricity flows +/-?

does the ecu send a signal to the injectors or does it prevent a current to pass through? the reason i am confused is because I don't understand why the resistor pack has power. is that just to power the resistance? also if the resistor is ground than does it just ground to the chasis? so i would need to make sure the resistor has good contact with metal??

Biggu

iTrader: (12)

I just got high impedance injectors from fuel injector clinic and they are just fine for me.

megamax

iTrader: (9)

so you said you will have your harness worked on again?? did you not go to dr tweak in the begining??

drewdizzle

iTrader: (4)

well they don't wire the injectors up. they leave that to the person buying the patch harness. since i opted to wire them sequentially, that is. the stock wiring is set up for batch so they can't just make a patch harness from batch to sequential, the wiring is different.

drewdizzle

iTrader: (4)

Started the car yesterday. couple things to tidy up and than its going to get tuned. will be working on the car tomorrow.

Sidesweep

looking forward to pics/results!

luvmysc400

iTrader: (2)

Nice, hope everything works out.

CrZxDrAgOn

iTrader: (1)

which part of cali are you from??? im about to take my sc300 out of the garage finnaly and go single

drewdizzle

iTrader: (4)

I'm in So Cal. I live in laguna hills and the car is being worked on in claremont, pomona area.

Superjatt

iTrader: (1)

Is that alex in the pictures?

TougeSC3

iTrader: (2)

Yep. That's Alex. I like how he's pulling the motor in sandals.

drewdizzle

iTrader: (4)

car is done. dynoed it this weekend with henry schelley from aem. the car made 380 whp on CA 91 octane. It feels like a beast too. did my first clutch kick this morning with my boss in the car. he giggled! haha. I am pleased with the outcome. can't wait to hit the track.

TRDmike

iTrader: (14)

Nice build, post videos if possible!

1JZPWRD

iTrader: (59)

Man that was a fast build. I hope mine goes as smooth as yours did. Thanks for sharing.

DoomLight

iTrader: (3)

that was pretty fast build lol im still working on mine.