When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What size was the piping? And your talkin about that U shaped pipe on the drivers side? All you had to do is lengthen the middle of it? I ask because I will be ordering an intercooler kit tonite
How do you like the hallman boost controller? I'm getting one for my stock twin one jay. Did you mount it in cabin or in the engine bay? Post pics
Mounted it in the engine bay right on the sideof the airbox. Can barely even see it but it's a nice spot and I used the factory mounting point. I'll get a pic later. It's really nice, with the smaller spring, it only allowed me to push 15lbs when tightened all the way. I installed the thicker spring which came with the kit and now I am doing 18lbs and there's still alot more room to go for more pressure.
Originally Posted by JDMb16bEG6
What size was the piping? And your talkin about that U shaped pipe on the drivers side? All you had to do is lengthen the middle of it? I ask because I will be ordering an intercooler kit tonite
2.5" piping, and both sides had to be lengthened. You can get away with lengthening one side only (driver) but the IC will be a few inches off center which I didn't want so both sides were lengthened.
Originally Posted by cmh
damn very sick. been away for a while didnt know u did the 2j swap. very nicely done