2jzGTE SCs - The Siblings of my Supra MKIV Toys
#1636
Damn , it wasn't as easy as I thought . You have to be very careful of metal pieces going inside. I had to tap them up side down so the metal pieces falls to the ground instead. And did a lot of frequent vacuuming. Just to make sure , tomorrow I would do a lot of rinsing with water , carb cleaner and compressed air .
Here they are .. finally , I can connect my catchcan lines .
Here they are .. finally , I can connect my catchcan lines .
#1638
Previous picture seems to show that the -10an line is touching the turbo exhaust housing. Actually it is more than an inch above the housing .
The other is perfect , right before the nitrous lines. I initially thought of using -12an catch can lines and am glad I didn't otherwise I would have had a problem on that side .
The other is perfect , right before the nitrous lines. I initially thought of using -12an catch can lines and am glad I didn't otherwise I would have had a problem on that side .
#1639
Driver School Candidate
Join Date: Dec 2011
Location: New York
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Ok gerrb, I spent like 3 hours reading this thread from the beginning to now. . Holly cow,,, all the things I want to do with my sc you did, all the tools I need you have. .. what in the world is your occupation, I'm mean I never seen any body do the things you did. .I hand it to you buddy. . You are what we call in NY Boss..lol.. keep it up. .I can't wait to see the red Dragon running. .amazing work. .my sc still have the stock twins on my gte..smh..I have to catch up at least half way..
#1640
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
Gerry, what a nice job on those. On the intake side of the valver cover, where is that AN line venting to? Kinda hard to see it on my cell. Car looks amazing. I wouldn't even trade it for an MKIV. It looks that great man. When I get back from second vacation, I want to come down there and see it personally. What's the status of the tuning lessons and your car being tuned? I am about ready to pick up those tuning 101 books. Lol
Btw, can you feed my outside dogs daily while I am gone and give them fresh water? Lol
Btw, can you feed my outside dogs daily while I am gone and give them fresh water? Lol
#1642
Ok gerrb, I spent like 3 hours reading this thread from the beginning to now. . Holly cow,,, all the things I want to do with my sc you did, all the tools I need you have. .. what in the world is your occupation, I'm mean I never seen any body do the things you did. .I hand it to you buddy. . You are what we call in NY Boss..lol.. keep it up. .I can't wait to see the red Dragon running. .amazing work. .my sc still have the stock twins on my gte..smh..I have to catch up at least half way..
Gerry, what a nice job on those. On the intake side of the valver cover, where is that AN line venting to? Kinda hard to see it on my cell. Car looks amazing. I wouldn't even trade it for an MKIV. It looks that great man. When I get back from second vacation, I want to come down there and see it personally. What's the status of the tuning lessons and your car being tuned? I am about ready to pick up those tuning 101 books. Lol
Btw, can you feed my outside dogs daily while I am gone and give them fresh water? Lol
Btw, can you feed my outside dogs daily while I am gone and give them fresh water? Lol
Learned a lot with my tuning lessons. I can mess around with my cars since there is no fear of breaking someone else car. It's the danger associated with it. No room for mistake. Well, I have no plans of tuning other people's car so no danger for me anyway. I can send you the books if you want. I am done with them. They teach you the basic principles of EFI and tuning but nothing about your AEM v2. My car is well tuned up to 17lbs right now , pump gas .. I will turn it up once AEM v2 flex fuel firmware update is out , that is if I haven't bought yet the ProEFI... getting tired of waiting. Besides , with the nitrous, which is tricky , I would ask a real pro with experience with direct port nitrous to tune it . I ain't taking the risk. Too much money to blow up in smoke at a fraction of a second with one mistake.
Damn , leave a bag full of food and a drum full of water out there so they don't starve and thirst while you are gone ..lmaol .
thanks .. I bought that cover more than 3 years ago. They don't produce them anymore. A month ago I called the place where I bought it and said one of the employee was willing to sell his personal piece but double the freaking price. They wan't $400 ... crazy !
Last edited by gerrb; 08-05-13 at 11:41 AM.
#1643
Today, I ordered a ProEFI system since I thought of selling the AEM v2 and this evening AEM Tuner 3.2 and firmware 02v02 had been released .. .
Decided to upgrade my firmware and install the new AEM Tuner , play with it while my new EMS isn't around yet.
Upgraded my map for the SC and started to play around with the tables . AEM now have Engine Failsafes like coolant , oil pressure , fuel pressure and O2 lean out protection . With its flex fuel capability and some failsafes , it will more than serve the needs of most people .
Decided to upgrade my firmware and install the new AEM Tuner , play with it while my new EMS isn't around yet.
Upgraded my map for the SC and started to play around with the tables . AEM now have Engine Failsafes like coolant , oil pressure , fuel pressure and O2 lean out protection . With its flex fuel capability and some failsafes , it will more than serve the needs of most people .
#1644
Lead Lap
iTrader: (17)
Join Date: Jan 2010
Location: No longer WOT, I am broke, Gerrb.
Posts: 416
Likes: 0
Received 1 Like
on
1 Post
Sir gerrb, I never get tired lookin at your Red Mamba's engine bay.. Really shows your hard work..
At least you finally got the EMS you've always wanted.. keep us posted..
At least you finally got the EMS you've always wanted.. keep us posted..
#1646
MY PERSONAL VIEW is , what makes the proEFI superior is all the other features and more failsafes it has compared to the AEM boxes both Infinity-10 and AEM v2. The proEFI has a stiffer learning curve if you want to work on it on your own compared to the AEM boxes. Though I know as you will see in other forums , there would always be politics , debates on these boxes. And I am not gonna side with anyone. It is up to the individual to check what works best for his project. Once you have seen and compared all of them , you will have to decide for yourself what best suits your needs , budget and what you or your tuner can work on. One box maybe overkill for a certain project while another box maybe underfeatured for another project.
Bottom line , we should choose the ECU not based on politics but on what we need , what we can pay for and what we or our tuner can work on. So , we got to do our homework and not simply go where the pack goes or where there is more noise.
Honestly , looking at it now , for a DAILY DRIVER in which a 400-500rwhp is more than enough , take note I am talking about a daily driver, day in day out and not a weekend warrior or a drag car or a dyno queen or a garage queen, I believe staying with the stock GTE ecu is the best . Build around it and you would always be happy with less issues. Ali_SC3 have said that time and again and kudos / my hats off to him. He had said this a long time ago and followed it up with his GTE ECU mod thread for the benefit of us all. How many cars on the streets have that 400-500rwhp ? And how many times in a day you would need to use that power ? IT INDEED IS A DISEASE ! We love to have so much RWHP that we seldom use , for which we spend tons of money and spend lots of time working on them rather than enjoying them. I am guilty as anybody here .. .
Last edited by gerrb; 08-06-13 at 09:15 AM.
#1647
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
It is indeed a disease. I am so thankful I decided to keep mine. I drove it around a few days ago and OMG what was I thinking, To add to this, driving Jays car is just amazing. Its nothing but a race car. Hard to start cold, have to stay on the gas until slightly warm, then OMG at the power throughout the power range, even on low boost. High boost is just AMAZING. If he got a 3.26 TT rear end and better tires, this thing would be ungodly.
I tried to check for an update on the AEM, and it is saying it up to date. Am I doing something wrong. Might be this stupid Windows 8. I am hoping with the new features it is compatible.
I tried to check for an update on the AEM, and it is saying it up to date. Am I doing something wrong. Might be this stupid Windows 8. I am hoping with the new features it is compatible.
#1649
Lead Lap
iTrader: (17)
Join Date: Jan 2010
Location: No longer WOT, I am broke, Gerrb.
Posts: 416
Likes: 0
Received 1 Like
on
1 Post
I need to replace my fuel pump and re-wire my boost/wideband gauges also install my turbo timer & oil pressure gauge. My wiring skills sucks big time lol but once those are taking care off, I can cruise the SC around just to break in the motor. I will need help w/ wirings tho so whenever u have free time on fri or sat just LMK