2jzGTE SCs - The Siblings of my Supra MKIV Toys
05-14-12, 05:50 AM
#573
Yeap ! didnt even know got so much harness in the garage .. found also a 5 speed Supra MKIV and another SC300 NA harness laying around ..
I can probably assemble another car with all the junk I have in both garages of my place here in Atlanta and in the South.
Last edited by gerrb; 05-14-12 at 06:19 AM.
05-14-12, 05:57 AM
#577
After some thinking , I decided , I will use the SC400 harness and Aristo 2jzgte harness . Make one harness out of them for my red dragon ? Why ? The Aristo 2jzgte harness has already the 40 pin plug properly pinned for my auto transmission and the jdm 6 speed harness 40 pin plug is not. All I have to do is cut the Aristo body plug and use the 5 body plugs from the SC400 harness. OF COURSE , you will need to extend every wire on that Aristo harness. And most of all , lol...., if you don't need the 6 speed supra harnesses , they can be sold at a better price than an Aristo harness. That helps you recoup some Benjamins ...
So you will not need this plug ... which is the gray big plug
So you will not need this plug ... which is the gray big plug
Last edited by gerrb; 05-14-12 at 07:21 AM.
05-14-12, 06:10 AM
#578
Ok.. now if you use the Aristo 2jzgte harness , you should know what those wires for the big gray plugs for... so you can convert/replace that plug into the 5 or 6 SC400 body plugs .
Here you go , attached is a file that describes every pin on the Aristo 2jzgte harness.. both the big gray plug , 40 pin and 80 pin plugs.
I freaking don't know why damn file wont upload as an attachment ..it is a Word Document file, .docx...... pm me your email add if you are interested and want a copy . 
Here you go , attached is a file that describes every pin on the Aristo 2jzgte harness.. both the big gray plug , 40 pin and 80 pin plugs.
I freaking don't know why damn file wont upload as an attachment ..it is a Word Document file, .docx...... pm me your email add if you are interested and want a copy .
Last edited by gerrb; 05-14-12 at 06:23 AM.
05-14-12, 06:46 AM
#579
Once I have decided which harnesses to work on and was done with the other activities of the day , I turned on my tv in my office at home, laid down a tarp so I don't mess up the carpet in the office , brought out some margarita drinks ... and went down to work ..
Last edited by gerrb; 05-14-12 at 09:24 AM.
05-14-12, 06:51 AM
#580
After a few minutes, I heard my wife tell me 
YOU MESS UP that carpet , you are cleaning and steam vacuuming it ... 
...
....I was quick as hell bringing and unwrapping those dirty , grimmey harnesses in the garage ..
YOU MESS UP that carpet , you are cleaning and steam vacuuming it ... .......I was quick as hell bringing and unwrapping those dirty , grimmey harnesses in the garage ..
Last edited by gerrb; 05-16-12 at 05:01 AM.
05-14-12, 07:05 AM
#582
AFTER some 9 hours with some rests and eating in between, some tequila with margarita mix, watching the clippers beat the grizzlies and the heat beating the pacers ...here is the finished product !
Last edited by gerrb; 05-14-12 at 07:24 AM.
05-14-12, 07:13 AM
#584
TODAY or later in the evening before I go to bed ... just to be safe , I WILL go over every damn circuit, pin and connections just to check END to END continuity and shortages .. I want to make sure that , the 1800 Tequila / 100% Agave didnt make my eyes roll around crisscrossing connections and pins. In short, I will make sure I got every pin and connections where it should be.
Last edited by gerrb; 05-14-12 at 07:19 AM.
