AnonymousG Pic/Progress Thread
#17
Pole Position
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Location: Bay Area, CA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Here is some recent pictures, mostly in order. haha
Last picture of my car Plastidipped.
Then between the time of removing the Plastidip and stuffs, I got into a accident 100% not at faulty.
Since the accident, I had one broken foglamp and one messed up high beam so I removed them.
So I removed the damaged bumper, and slightly tweaked the bumper support to somewhat fit my car. and installed my spare primer bumper, which I actually like the non SC4 lip look.
Also finally did my plugs, cap, rotor, and valve cover gaskets.
You also might notice, me having different rims. Mainly due to all of my varrstoens cracking.
Last picture of my car Plastidipped.
Then between the time of removing the Plastidip and stuffs, I got into a accident 100% not at faulty.
Since the accident, I had one broken foglamp and one messed up high beam so I removed them.
So I removed the damaged bumper, and slightly tweaked the bumper support to somewhat fit my car. and installed my spare primer bumper, which I actually like the non SC4 lip look.
Also finally did my plugs, cap, rotor, and valve cover gaskets.
You also might notice, me having different rims. Mainly due to all of my varrstoens cracking.
#18
Pole Position
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Location: Bay Area, CA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Then some random pics with my damaged bumper installed and between the recent update.
Removed my cat and straight piped my car.
Repaired my varrstoens for the last time, before I finally sold them. But here it is with a 8mm spacer. I also installed extended studs somewhere in the past year.
Removed my cat and straight piped my car.
Repaired my varrstoens for the last time, before I finally sold them. But here it is with a 8mm spacer. I also installed extended studs somewhere in the past year.
#19
Pole Position
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Location: Bay Area, CA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Now for the recent update.
Recent installed
black S2000 front seats
better condition grey rear seats
Window visors
Roof spoiler
Battle Version Modded Knuckles
Rear subframe with Battler Version bushings
Supra Swaybars
Battle Version Front swaybar endlinks
Newer rear hubs
Supra FUCA with poly bushings
FLCA with Poly bushings
All arms in rear have poly bushing
Poly bushing for the rear diff
Used Steering rack w/ flipped OEM tie rod ends
Braided power steering line
Newish exhaust 3" titanium midpipe with vband to round magnaflow to a y.
New steering angle! All i need now is new tie rod ends, I want BV and some spacers.
Raised it up a bit, mianly due to newish exhaust and old ride high i had an inch of clearance.
Then got bored and did this the other night. And now your up to date on how my car is!
The car rides 100000000x better with poly bushings in all the arms. Just need to get my right rear toe situated, due to alignment places saying it is maxed out..?
Recent installed
black S2000 front seats
better condition grey rear seats
Window visors
Roof spoiler
Battle Version Modded Knuckles
Rear subframe with Battler Version bushings
Supra Swaybars
Battle Version Front swaybar endlinks
Newer rear hubs
Supra FUCA with poly bushings
FLCA with Poly bushings
All arms in rear have poly bushing
Poly bushing for the rear diff
Used Steering rack w/ flipped OEM tie rod ends
Braided power steering line
Newish exhaust 3" titanium midpipe with vband to round magnaflow to a y.
New steering angle! All i need now is new tie rod ends, I want BV and some spacers.
Raised it up a bit, mianly due to newish exhaust and old ride high i had an inch of clearance.
Then got bored and did this the other night. And now your up to date on how my car is!
The car rides 100000000x better with poly bushings in all the arms. Just need to get my right rear toe situated, due to alignment places saying it is maxed out..?
#20
what up man! looking nice! im back in the area this weekend it you still need the 5spd ds and want to trade diffs. lmk, u got my number
let us know how the setup feels right switched rod ends+ knuckles, should get pretty good angle
let us know how the setup feels right switched rod ends+ knuckles, should get pretty good angle
Last edited by scott101; 05-06-14 at 04:18 PM.
#22
Pole Position
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Location: Bay Area, CA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
I'll hit you up in a couple of days, when I finally get my last 5spd parts. Haha, just fw bolts and a slave.
We'll I was told that they were supra upper control arms.. But if it isn't is ok, all my bushing are either solid or poly now.
#24
Pole Position
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Location: Bay Area, CA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Replace my motor mounts finally yesterday, big difference! No delay in power being transmitted with this. Mount and to top it off I got these for the same price as oem supra mounts.
20140513_120956 by AnonymousLG, on Flickr
20140513_120956 by AnonymousLG, on Flickr
#28
wow, your car has come a long way and I like where its going. It's a bummer with all those accidents and incidents but you come back right after which is great. Continue what you're doing.
#29
Pole Position
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Location: Bay Area, CA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the bump guys.
I haven't updated in a while, but in between then I finally converted my car to manual. Took my 1.5 days, pretty good considering I did it on jacks with no help.
I haven't updated in a while, but in between then I finally converted my car to manual. Took my 1.5 days, pretty good considering I did it on jacks with no help.
Last edited by AnonymousG; 10-01-14 at 11:42 PM.