P.D.Fab sc300 single turbo build!
10-02-12, 01:33 PM
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2012
Location: va
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
P.D.Fab sc300 single turbo build!
Welcome and Thanks for looking at my SC300 build.
My current project is a 1995 SC300 NA-T build. I am in the process of building this car for a modest number. I am also going to attempt to use the stock block with the only internal mods being head studs and gasket. In the future cams will be added after the first dyno session so we can see performance potentials.
turbo googies:
Precision 6776h turbo
Tial q bov.
Tial watercooled wastegate
P.D. Fab exhaust manifold
P.D.Fab I.C and I.C pipping
P.D.Fab intake manifold ( this intake manifold uses a Q45 T.B. and you can even keep powersteering for the NA modle 2jz.)
P.D.Fab exhaust
P.D.Fab fuse box
thats the sum of the parts. I have to leave some stuff a suprise for later!
more pics will be posted when I finish the setup which should be in the next few weeks due to parts on order still!!! let me know what you guys think.
My current project is a 1995 SC300 NA-T build. I am in the process of building this car for a modest number. I am also going to attempt to use the stock block with the only internal mods being head studs and gasket. In the future cams will be added after the first dyno session so we can see performance potentials.
turbo googies:
Precision 6776h turbo
Tial q bov.
Tial watercooled wastegate
P.D. Fab exhaust manifold
P.D.Fab I.C and I.C pipping
P.D.Fab intake manifold ( this intake manifold uses a Q45 T.B. and you can even keep powersteering for the NA modle 2jz.)
P.D.Fab exhaust
P.D.Fab fuse box
thats the sum of the parts. I have to leave some stuff a suprise for later!
more pics will be posted when I finish the setup which should be in the next few weeks due to parts on order still!!! let me know what you guys think.
Last edited by DaveGS4; 11-18-12 at 09:12 AM.
10-02-12, 02:31 PM
#2
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
So far I am totally impressed with it. Who is doing the welding? It looks great! What is the number you are wanting. The turbo should yield about 600 or so, depends on the fuel, rail, injectors, pump, and so on.. So far so good. Keep the pictures coming..
Oh yeah, welcome to CL !!!!
Oh yeah, welcome to CL !!!!
10-02-12, 03:28 PM
#3
Driver School Candidate
Thread Starter
Join Date: Oct 2012
Location: va
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
well the fuel set up is going to be a twin feed rail which i still have to make. all the welds are done by myself. i am looking at going with aem as far as a tuning software.
Last edited by DaveGS4; 11-18-12 at 09:12 AM.
Trending Topics
[/IMG]
11-08-12, 05:54 AM
#12
Driver School Candidate
Thread Starter
Join Date: Oct 2012
Location: va
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
ok so i know i have not posted Anything in a while, but that dosen't mean i haven't done anything! i hope you guys enjoy!
new valve covers im manking.
also made fender flares.
we got excited and put the turbo kit on the new sc300 just to make sure it fit nice.
here i am making a new water overflow.
getting ready for paint!
i do have alot more pictures but you guys get the idea of whats been going on. thanks for looking..
new valve covers im manking.
also made fender flares.
we got excited and put the turbo kit on the new sc300 just to make sure it fit nice.
here i am making a new water overflow.
getting ready for paint!
i do have alot more pictures but you guys get the idea of whats been going on. thanks for looking..
Last edited by DaveGS4; 11-18-12 at 09:14 AM.
