97 SC300 Repaint + Build
#31
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: NY
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
it should stay away, before i gave it to the body shop, I spent about 45 min sanding that rust off to the bare metal.
im in Long Island, but i'm down for a meet.
im in Long Island, but i'm down for a meet.
Last edited by sc4demon; 11-15-12 at 06:03 PM.
#32
Moderator
iTrader: (71)
Also doing the emblems in black or flat black, what do you think? Nice
Also going to do the side markers in flat black. No! clear or JDM side markers.
Got to get those headlights and fogs cleared up soon. Immediately!
**Hey what's your plans for the RED under the hood? Suggest a flat black, which you could probably do yourself with a little time and patience?
__________________
Also going to do the side markers in flat black. No! clear or JDM side markers.
Got to get those headlights and fogs cleared up soon. Immediately!
**Hey what's your plans for the RED under the hood? Suggest a flat black, which you could probably do yourself with a little time and patience?
__________________
#36
get bc racing trust me i have on my sc and i love them there very comfortable car looks pretty good nice job whats next?
#38
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: NY
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
Yeah thanks. I just bought some BC Racing BR Series Coilovers today. I also cleaned up the headlights with the 3M Restoration kit but the passenger side is still not as clear as the drivers side. Also bought the home link visor but too lazy to install it. Got 6k and 3k HID but haven't installed it yet. Also got a new window for the rear but to lazy to go to the body shop in this cold weather.
#39
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: NY
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
I just got my coilovers installed yesterday. Here are some quick pics with my phone. I'll get better ones when I get a chance.
Got it done at Tach Motor Works in Oceanside, NY
Got it done at Tach Motor Works in Oceanside, NY
Last edited by sc4demon; 03-14-13 at 03:39 PM.
#41
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: NY
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
I rub when I'm turning though.
I'm getting some 18's next week and can't even fit a finger between the wheel well with the stock 16's.
Do I have the car too low or will the 18's clear with low profiles?
Last edited by sc4demon; 03-04-13 at 09:44 PM.
#44
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: NY
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
NEW Wheels
Got some new wheels.
TSW Jarama 18x8
What do you guys think? I personally don't really like them too much, I just got them b/c I got them really cheap and the tires are brand new.
Also the wheels were able to clear with no problems. Though when I removed the stock 16's I could tell the wheel well was starting to get eaten up. I guess I've gotta relocate the wire harness this weekend.
TSW Jarama 18x8
What do you guys think? I personally don't really like them too much, I just got them b/c I got them really cheap and the tires are brand new.
Also the wheels were able to clear with no problems. Though when I removed the stock 16's I could tell the wheel well was starting to get eaten up. I guess I've gotta relocate the wire harness this weekend.
Last edited by sc4demon; 03-14-13 at 03:41 PM.