Dengman's '99 LS400 build thread
#50
Lexus Test Driver
iTrader: (3)
I hit a skunk years ago in another car.... It didn't get stuck under the car but my god was that a horrible ordeal..
Had to jack the car up on one side as high as I possibly could so I could bathe the underside of the car with HD degreaser and power wash, repeating it 6 times to get most of the smell off the car... Took a few months of the smell to full deminish.
So just be happy whatever you hit WASN'T a skunk! haha
Had to jack the car up on one side as high as I possibly could so I could bathe the underside of the car with HD degreaser and power wash, repeating it 6 times to get most of the smell off the car... Took a few months of the smell to full deminish.
So just be happy whatever you hit WASN'T a skunk! haha
#51
Lead Lap
Thread Starter
I hit a skunk years ago in another car.... It didn't get stuck under the car but my god was that a horrible ordeal..
Had to jack the car up on one side as high as I possibly could so I could bathe the underside of the car with HD degreaser and power wash, repeating it 6 times to get most of the smell off the car... Took a few months of the smell to full deminish.
So just be happy whatever you hit WASN'T a skunk! haha
Had to jack the car up on one side as high as I possibly could so I could bathe the underside of the car with HD degreaser and power wash, repeating it 6 times to get most of the smell off the car... Took a few months of the smell to full deminish.
So just be happy whatever you hit WASN'T a skunk! haha
#52
BahHumBug
iTrader: (10)
They aren't Universal, but iirc these will work for the LS/GS/IS just fine. They are a bit of a pain to install over the single piece ones since if you aren't careful when centering the spindle over them you can knock one off, but that's solved with an extra pair of hands and some care.
I'll throw up a DIY in the near future about installing them, as you need to cut the dust shield since it has an indent right next to the ball joint.
Thread
Thread Starter
Forum
Replies
Last Post
marklfarkl
LS - 1st and 2nd Gen (1990-2000)
15
11-07-19 09:37 AM