95 SC400 3UZ-FE Swap
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2008
Location: AZ
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
95 SC400 3UZ-FE Swap
Last summer I picked up a low mileage SC400 with a blown head gasket. While I had the engine out, I was overcome with the desire to put a 4.3 back in. After 6 months of scrounging parts, it's in and running. I still need to find an airbox from a 4.3 GS or SC and a gated 5 speed shifter and cluster from a 98-00 SC400, but beyond that, it runs great.
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2008
Location: AZ
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I do have some pics, but I still need to crop most of them. The engine is from a 2001 GS430 w/68k miles. I'll get some pics posted when I get some free time.
#7
Driver School Candidate
Thread Starter
Join Date: Apr 2008
Location: AZ
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I built a custom harness to extend appropriate cabin signals to the GS's underhood ECU. Sounds way easier than it was. The one difference on the engine block is where the rear of the ps pump mounts to the block. Pretty much everything else was wiring and immobilizer.