is300 SLAMMED/FITMENT/DUAL-EXHAUST
#31
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: ca
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
thanks still more to come
i never was a fan of the altezza lights so i tinted the lights red people always think there different but there just tinted . best 40 bucks i ever spent on the car
#33
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Did you have to roll/pull the quarters and front fenders with the 9.5" rears? I really want to run a set of 19x10 rears but I haven't seen anyone do it without cutting the quarters and fender lips.
#34
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: ca
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
it was a more aggresive pull in the front then the back . cus i couldnt turn without rubbing the fender or the liner.
the rear was slight pull and roll . then again i have 215/35/19 so it depends what u run on the tire.
but more them likely u need a major roll and pull up front and rear . since u want 19x10
#35
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: ca
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
so summers almost here so its time to finally start working on the body and now i decided to do a custom front bumper. the look i want doesnt meet my standards that aftermarket has for the is300
dont get me not saying what it offers is wack ,just isnt what i want .im going more for the vip look
id appreciate everyone if they can give me ideas and honest opinons
thanks
this is my old spray can crappy broken bumper
![](http://img577.imageshack.us/img577/9431/imag0675g.jpg)
i was looking to get a new bumper but i found one the same color with out broken tabs and better condition $140
![](http://img202.imageshack.us/img202/3799/20130509112433.jpg)
![](http://img69.imageshack.us/img69/9854/imag0672k.jpg)
Here is the bumper i want to cut the lower half and and mold it into mine
i liked this bumper because the lower grill is going to look much better with out the honey comb one. and the the bumper appears to look like it has a lip but its just part of the bumper.
$50 oh and can anyone guess what its off of
![](http://img28.imageshack.us/img28/538/20130509112420.jpg)
![](http://img823.imageshack.us/img823/7963/imag0677c.jpg)
im still not sure what do about fog lights
dont get me not saying what it offers is wack ,just isnt what i want .im going more for the vip look
id appreciate everyone if they can give me ideas and honest opinons
thanks
this is my old spray can crappy broken bumper
![](http://img577.imageshack.us/img577/9431/imag0675g.jpg)
i was looking to get a new bumper but i found one the same color with out broken tabs and better condition $140
![](http://img202.imageshack.us/img202/3799/20130509112433.jpg)
![](http://img69.imageshack.us/img69/9854/imag0672k.jpg)
Here is the bumper i want to cut the lower half and and mold it into mine
i liked this bumper because the lower grill is going to look much better with out the honey comb one. and the the bumper appears to look like it has a lip but its just part of the bumper.
$50 oh and can anyone guess what its off of
![](http://img28.imageshack.us/img28/538/20130509112420.jpg)
![](http://img823.imageshack.us/img823/7963/imag0677c.jpg)
im still not sure what do about fog lights
![](http://img835.imageshack.us/img835/5681/imag0678ld.jpg)
#39
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: ca
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
test fitted the new bumper , so far so good . all I have to do is work on
how to fit the plastic guard on the bottom and paint.
I still don't know wtf to do about the the fogs , I want to try something different so I don't want to use the oem ones . please feel free to give suggestions ,comments etc..
I would appreciate some feedback
![](http://img818.imageshack.us/img818/2554/20130517101515.jpg)
![](http://img845.imageshack.us/img845/3006/20130517101601.jpg)
how to fit the plastic guard on the bottom and paint.
I still don't know wtf to do about the the fogs , I want to try something different so I don't want to use the oem ones . please feel free to give suggestions ,comments etc..
I would appreciate some feedback
![](http://img818.imageshack.us/img818/2554/20130517101515.jpg)
![](http://img845.imageshack.us/img845/3006/20130517101601.jpg)
![](http://img594.imageshack.us/img594/1689/20130517101529.jpg)
#40
Driver School Candidate
Join Date: May 2013
Location: fl
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
#41
Driver School Candidate
Join Date: May 2013
Location: fl
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
#42
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: ca
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
no its off a Mitsubishi mirage im getting it painted already as of today . Im going with led DRL fogs but if I don't like them im going to remove them
#44
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
The custom bumper suits the car very nicely IMO, you can't tell that it was originally designed by two completely different companies!