When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Driver seat installed....brown ebrake handle needs to go...and I am undecided on if I want to leave the center console trim brown or just go to all black
Sorry guys it is hard to get pictures....single bay garage with limited lighting....
Did it lower the seat position a good bit? I'd love to switch out to some race seats to save weight and keep me better positioned as the stock seats are like sitting on a slip and slide.
Ryan, that Black does look good! If you're going to do it, now is the time...since your SC is in storage for the winter months?
Well SEM paint is very sensitive and it needs to be done outside cause it is very toxic and temperamental....I will wait till it gets warmer out to spray it...I need to touch a few other pieces up that got scuffed up as well..
Originally Posted by kez
Damn those seats look good
Thanks....definitely will take some getting used to with fixed buckets
Originally Posted by HiPSI
Did it lower the seat position a good bit? I'd love to switch out to some race seats to save weight and keep me better positioned as the stock seats are like sitting on a slip and slide.
This style of seat which is bottom mount makes the height relatively close to stock.....side mount seats will allow you to go much lower...but the weight savings are huge....I figure with slider and bracket installed they have to be around 30lbs total....at least if not more than half the weight of the stock SC seats....they are heavy as hell
These seats definitely are a snug fit and it will feel good to stay planted in the seats when ripping the car around...
Ah, I see...gotcha Ryan. I didn't think about the SEM paint and the temp/weather. Good reminder for me.
Yep got a couple other things I want to finish up......10mm spacers for up front.....finish front splitter....install lower door panel trim...and adjust coils
Driver seat installed....brown ebrake handle needs to go...and I am undecided on if I want to leave the center console trim brown or just go to all black
Did you use the mk4 supra racing seat brackets to install your seats?
Yes....Sparco bracket and slider for 93-98 Supra...
Here is how it is all mounted up together with sliders and seat....the washers were added so the slider would clear the front of the seat.....I went to a local hardware store and picked up longer bolts and washers to raise it up and add a little rake to the seat..
Yes....Sparco bracket and slider for 93-98 Supra...
Here is how it is all mounted up together with sliders and seat....the washers were added so the slider would clear the front of the seat.....I went to a local hardware store and picked up longer bolts and washers to raise it up and add a little rake to the seat..
Thanks for confirming that.
Were you still able to mount the stock seat belt buckle to the side of the seat?