CatManD3W SC300 Ongoing Build...
#766
Racer
iTrader: (6)
I just sent a message to induction performance, they quoted me 3070.00 shipped everything included even base tune for their ProEFI 128 kit for the IS300 that's about 1700 less then the old prices and includes shipping from FL to PA. I can't imagine a get swapped SC would cost much different.
Last edited by Halon; 04-11-16 at 06:01 PM.
#767
Oh wow 1700 less is pretty good savings. But still that's more than I expexted. I paid quit a bit less yet for my PnP Infinity 506 from, and that also includes a customized base tune and one of the AEM canbus gauges as well. In case ur still shopping around, might be worth a thought. I had to buy my sensors separate thoug, so maybe if the proefi came wth all that then that's nice.
Just looking for a comparison on the price to the proefi.
#768
Racer
iTrader: (6)
Here's the price break down of my setup from Vlad:
Infinity6 (506) ECU: $1350
Custom PnP Harness: $575
AEM CAN gauge with Lexus logo: $375
Base calibration: $200
Total: $2500 shipped
As for sensors, I had some already that we could reuse, and I bought some new ones. But here's my list of sensors that I can think of off the top of my head.
AEM-SS 100psi fuel pressure sensor
AEM-SS 5bar MAP sensor
GM IAT sensor
GM Flex Fuel sensor (because I burn corn)
MAC 3-port BCS
Bosch WB sensor (plugs directly into Infinity, no external controller required)
I may have forgotten something. Sorry I don't remember the prices I paid but you can probably find the prices pretty quickly. And those are the sensors / brands I chose. There's all sorts of options if you shop around (more and less expensive options).
Infinity6 (506) ECU: $1350
Custom PnP Harness: $575
AEM CAN gauge with Lexus logo: $375
Base calibration: $200
Total: $2500 shipped
As for sensors, I had some already that we could reuse, and I bought some new ones. But here's my list of sensors that I can think of off the top of my head.
AEM-SS 100psi fuel pressure sensor
AEM-SS 5bar MAP sensor
GM IAT sensor
GM Flex Fuel sensor (because I burn corn)
MAC 3-port BCS
Bosch WB sensor (plugs directly into Infinity, no external controller required)
I may have forgotten something. Sorry I don't remember the prices I paid but you can probably find the prices pretty quickly. And those are the sensors / brands I chose. There's all sorts of options if you shop around (more and less expensive options).
#769
Driver School Candidate
Join Date: Nov 2007
Location: Pennsylvania
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Here's the price break down of my setup from Vlad:
Infinity6 (506) ECU: $1350
Custom PnP Harness: $575
AEM CAN gauge with Lexus logo: $375
Base calibration: $200
Total: $2500 shipped
As for sensors, I had some already that we could reuse, and I bought some new ones. But here's my list of sensors that I can think of off the top of my head.
AEM-SS 100psi fuel pressure sensor
AEM-SS 5bar MAP sensor
GM IAT sensor
GM Flex Fuel sensor (because I burn corn)
MAC 3-port BCS
Bosch WB sensor (plugs directly into Infinity, no external controller required)
I may have forgotten something. Sorry I don't remember the prices I paid but you can probably find the prices pretty quickly. And those are the sensors / brands I chose. There's all sorts of options if you shop around (more and less expensive options).
Infinity6 (506) ECU: $1350
Custom PnP Harness: $575
AEM CAN gauge with Lexus logo: $375
Base calibration: $200
Total: $2500 shipped
As for sensors, I had some already that we could reuse, and I bought some new ones. But here's my list of sensors that I can think of off the top of my head.
AEM-SS 100psi fuel pressure sensor
AEM-SS 5bar MAP sensor
GM IAT sensor
GM Flex Fuel sensor (because I burn corn)
MAC 3-port BCS
Bosch WB sensor (plugs directly into Infinity, no external controller required)
I may have forgotten something. Sorry I don't remember the prices I paid but you can probably find the prices pretty quickly. And those are the sensors / brands I chose. There's all sorts of options if you shop around (more and less expensive options).
Last edited by TweakedIS3; 04-12-16 at 03:22 PM.
#771
Driver School Candidate
That's a good setup! I really like the AEM Infinity 6! My buddy is the dude that makes those CAN gauges. In fact, I was his test mule!
Here's the price break down of my setup from Vlad:
Infinity6 (506) ECU: $1350
Custom PnP Harness: $575
AEM CAN gauge with Lexus logo: $375
Base calibration: $200
Total: $2500 shipped
As for sensors, I had some already that we could reuse, and I bought some new ones. But here's my list of sensors that I can think of off the top of my head.
AEM-SS 100psi fuel pressure sensor
AEM-SS 5bar MAP sensor
GM IAT sensor
GM Flex Fuel sensor (because I burn corn)
MAC 3-port BCS
Bosch WB sensor (plugs directly into Infinity, no external controller required)
I may have forgotten something. Sorry I don't remember the prices I paid but you can probably find the prices pretty quickly. And those are the sensors / brands I chose. There's all sorts of options if you shop around (more and less expensive options).
Infinity6 (506) ECU: $1350
Custom PnP Harness: $575
AEM CAN gauge with Lexus logo: $375
Base calibration: $200
Total: $2500 shipped
As for sensors, I had some already that we could reuse, and I bought some new ones. But here's my list of sensors that I can think of off the top of my head.
AEM-SS 100psi fuel pressure sensor
AEM-SS 5bar MAP sensor
GM IAT sensor
GM Flex Fuel sensor (because I burn corn)
MAC 3-port BCS
Bosch WB sensor (plugs directly into Infinity, no external controller required)
I may have forgotten something. Sorry I don't remember the prices I paid but you can probably find the prices pretty quickly. And those are the sensors / brands I chose. There's all sorts of options if you shop around (more and less expensive options).
#774
Driver School Candidate
Join Date: Nov 2007
Location: Pennsylvania
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
#778
Well it appears my fueling issue has resolved itself once again...
Its gotta be bad gas or the 15% ethanol that maybe is causing issues....since car sits for about 5-6 months in garage....it may be gelling up....causing either fuel filter or injectors to get clogged somehow...
No idea why it does this.....
Just need to drive the car more I guess.....haha
Its gotta be bad gas or the 15% ethanol that maybe is causing issues....since car sits for about 5-6 months in garage....it may be gelling up....causing either fuel filter or injectors to get clogged somehow...
No idea why it does this.....
Just need to drive the car more I guess.....haha