looks good!

thanks.......night shot still waiting on the wheels
http://www.flickr.com/photos/38670456@N03/9419506116/

thanks for the tip . i should have look at the pictures real well before starting. i taught the rears was in the trunk. however pulling a few tabs and realize it was in the back seat . i got the bc
12 k front and 10 rear . extreme lows. i havent adjusted the ride height yet but still drop it a 1 to 2 inch. satisfied for now. until my rims comes in .

^^ good choice man what kind of wheels you looking to get BTW.


well guys my wheels came in and heres what i got

They were originally 19x8.5 +29 19x9.5 +24. FR face all around
i made 19x9.5 +24 for the front and relip the front (new rear) to 19x10 +9,

http://www.flickr.com/photos/38670456@N03/9309768693/

will be test fitting once i have time...:p

Looking at gettin ssr Vienna kreis 1 st choice or Leon hardritt ritter . Nice wheels man .

well did some testing but and found out that the fronts wont fit / clear with out spacer so i got a set of spacers to try on

with a 50MM
http://www.flickr.com/photos/38670456@N03/9312552914/

http://www.flickr.com/photos/38670456@N03/9312553532/

http://www.flickr.com/photos/38670456@N03/9309767217/

going to try to get a 38MM spacer and see what happens

well wanted to see the fitment with out the calipers and damn it looks good to bad i cant have it like that.got a lot more to do :D
http://www.flickr.com/photos/38670456@N03/9312559698/
in other news on stocks
http://www.flickr.com/photos/38670456@N03/9419511702/

Those are some nice wheels man. The car is going took really good once they're on.

Looks like it will fit perfect when lowered a bit more. Just need to slap on some 215/35 tires and maybe a slight roll/pull of the fenders.

orrrrr...you could get a tape measure and cut out all the test fitting and guess work? :confused:


gonna look great BTW :thumbup:

well i couldnt find 215 here on island so 225 will have to do, but will make them work.

LOL i did thanks;)

what i done so far, 1.5 spacer milled 1/8 off and a set of new calipers milled to clear the wheels i forget how much i took off.... so i dont have to really stretch tires and pull so much on the fenders.

http://www.flickr.com/photos/38670456@N03/9573737698/
http://www.flickr.com/photos/38670456@N03/9573742510/
now just more LOW and camber .....:D

got some more work done, rolled fenders and trim to make them fit.....

test fit,
http://www.flickr.com/photos/38670456@N03/9570952079/
http://www.flickr.com/photos/38670456@N03/9570964413/

http://www.flickr.com/photos/38670456@N03/9573751892/
with a little pull
http://www.flickr.com/photos/38670456@N03/9570956769/

fitting the fronts...
http://www.flickr.com/photos/38670456@N03/9573809600/

http://www.flickr.com/photos/38670456@N03/9571013409/
will test drive and see what hits and what not..:D:D

Awesome!!!!!