02 LS430 Going Low
#1
Pole Position
Thread Starter
02 LS430 Going Low
Sup Fellas been browsing around this form for a while now and learned a lot from other people's build
and input. so its only fair i share mine.....so with out further due.....my STOCK 2002 LS430 non UL
plan on going LOW with some sorta Crazy offset wheels if possible.
http://www.flickr.com/photos/38670456@N03/8650880354/
http://www.flickr.com/photos/38670456@N03/8649782581/
and input. so its only fair i share mine.....so with out further due.....my STOCK 2002 LS430 non UL
plan on going LOW with some sorta Crazy offset wheels if possible.
http://www.flickr.com/photos/38670456@N03/8650880354/
http://www.flickr.com/photos/38670456@N03/8649782581/
#3
Pole Position
Thread Starter
yes indeed it is..
.well i wanted to go Bags but dont have that kinda of cash flow right now, so i got a set
of Megan ez here's some pics of the installation.
http://www.flickr.com/photos/38670456@N03/8933005088/
http://www.flickr.com/photos/38670456@N03/8932397695/
http://www.flickr.com/photos/38670456@N03/8933018432/
pretty easy ****
.well i wanted to go Bags but dont have that kinda of cash flow right now, so i got a set
of Megan ez here's some pics of the installation.
http://www.flickr.com/photos/38670456@N03/8933005088/
http://www.flickr.com/photos/38670456@N03/8932397695/
http://www.flickr.com/photos/38670456@N03/8933018432/
pretty easy ****
#6
Pole Position
Thread Starter
thanks man but it's a little beat up scratch here and there no worries well respray once i get my wheel fitment on and what not LOL
#7
Driver School Candidate
Join Date: Jul 2013
Location: HI
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
any suggestion on how to and where to start . where i would have trouble installin. ? waitin on mines to come in . just ordered my bc's last night. excited to see mine slammed
Trending Topics
#8
Pole Position
Thread Starter
might have to remove the panel, **** i just pulled it up to fit the ratchet.
BC's huh hope you ordered the ultra slammed one been hear they dont go that LOW on the rear
http://www.flickr.com/photos/38670456@N03/8932391805/
#9
Pole Position
Thread Starter
well here's how it looks on the ground still need to let it settle in.
http://www.flickr.com/photos/38670456@N03/8933023872/
http://www.flickr.com/photos/38670456@N03/8932405971/
http://www.flickr.com/photos/38670456@N03/8933023872/
http://www.flickr.com/photos/38670456@N03/8932405971/
#10
Pole Position
Thread Starter
well ok guys after looking around for some wheels and seeing that its better to build a set, so Easton over at CZ wheels hooked me up with some Weds Kranze LXz 19x8.5 +29 19x9.5 +24. FR face all around will do some more measure and home work to see were i want to go with re-lipping them.
#12
美少女戦士セーラームーン
iTrader: (24)
If you plan on slamming the car on wide wheels/tires I would highly recommend going with a custom set of BC's. The EZ's were fine when I ran 18"s but when I moved up to 20"s I had a lot of rubbing issues. The EZ's are too soft for me to ride low and now I have to sell them to buy BC's.
#13
Pole Position
Thread Starter
The EZ's look good. Bags would be awesome but they are too expensive for a good setup.
If you plan on slamming the car on wide wheels/tires I would highly recommend going with a custom set of BC's. The EZ's were fine when I ran 18"s but when I moved up to 20"s I had a lot of rubbing issues. The EZ's are too soft for me to ride low and now I have to sell them to buy BC's.
If you plan on slamming the car on wide wheels/tires I would highly recommend going with a custom set of BC's. The EZ's were fine when I ran 18"s but when I moved up to 20"s I had a lot of rubbing issues. The EZ's are too soft for me to ride low and now I have to sell them to buy BC's.