JesLet

iTrader: (19)

I did not like the price they charged me I'm happy though that it fits perfect. I'm expecting vibrations on this one piece driveshaft, I'm hoping nothing bad in a long run.

Salamat to you. I would to do this again if i could. I had fun tearing this engine apart, never done it before but with the help of TSRM and members here, it was a piece of cake. I wish i could go all out with parts but i have a budget on this, unlike this guy here, I'm not gonna say who, buying SCs and tearing it apart haha.

JesLet

iTrader: (19)

Got my downpipe and IC piping, I have to modify the downpipe again becuase it was a tight fit

JesLet

iTrader: (19)

Installed all hoses to the wastegate. Feed and return lines for the turbo.





BOV installed

JesLet

iTrader: (19)

Tapped the valve covers for the catch can...

geauxsimon

I like the downpipe and intercooler piping you had done! Looks so clean...Who did it and how much?

fastnoypi

i was just thinking about this cap. If it is something that would break off or deteriorate ,
a good no-worry fix would be cutting the nipple off..tapping and screwing a bolt on with a dab of loctite. Or pulling the nipple out completely with vice grips..then tap the hole and plug with a bolt.

gerrb

iTrader: (34)

lmaol .. Tigas Ulo ni Dennis !!! He has been warned by some people here .

JesLet

iTrader: (19)

Haha, not anymore kuya. I might go back December 2014. You should go, its gonna be fun there during Christmas.

It was done locally, second time went there for welding and he does an excellent job. Machine-like welding but done by hand. Unexpectedly $200 but oh well
Yes, people yelled at me here because of this. I wish i had it welded, first time rebuilding here

JesLet

iTrader: (19)

Intercooler pics

JesLet

iTrader: (19)

I was gonna put this Greddy catch can in the place of the charcoal canister but changed my mind.

Instead, I modified the thing.

JesLet

iTrader: (19)

And here she is bolted down

JesLet

iTrader: (19)

Almost there..... need to modify the downpipe this week... and need to install electronics/gauges/ vacuum lines.

gerrb

iTrader: (34)

Dennis - is that catch can baffled ? If yes , aren't you defeating its purpose by laying it on its side and be blowing the collected oil out of that filter ?

JesLet

iTrader: (19)

I don't think it is baffled. Nothing inside i'm pretty sure. I washed it on the sink after tapping it for the breather. Looks like a empty can.

Automan

iTrader: (3)

Awesome build thread and great job on everything you have done! I hope my build turns out this good. I will stay tuned in to this channel.