When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks man... heater still no worky... but i could care less... who needs heater in AZ
Hmmm, did you visually check to see if the valve is opening now? If it's not, bypass the vsv and put the vacuum source right on the actuator to make sure the signal and diaphragm are good. If it opens then, you will need to verify the vsv wiring.
What percentage adjustment range does that Dakota box support? I am wondering if I can find a box that will adjust signal enough to convert my kph dash to mph...
What percentage adjustment range does that Dakota box support? I am wondering if I can find a box that will adjust signal enough to convert my kph dash to mph...
You can give it a try.. Here's the instruction manual, I calibrated on OUT1 and it won't go down on speed anymore, so i tried OUT2 and i ended up using OUT5.
When I wire TC and E1 as per instruction, my CRUISE and ABS are blinking intermittently. AIBAG light is still on and not blinking, so this means it is not code 22.
Should I clear it anyway and maybe buy another spare of airbag haha
I tried to clear the airbag light with 3 wires and a toggle switch and light is still on. I tried about 5 times and gave up. I probably take the bulb off grrrrrrr
Love how close the car has come to completion, JesLet! And the AR-5 is shifting and cruising just fine now? You've put an excellent example here for the community to see how it's done!
Just went through your thread. A bunch of work for sure. Good job so far, keep it up!
Thanks
Originally Posted by KahnBB6
Love how close the car has come to completion, JesLet! And the AR-5 is shifting and cruising just fine now? You've put an excellent example here for the community to see how it's done!
Yes, shifts like butter. Kept my R154 for rebuild later if i blow this one up.
Originally Posted by PoGikoSc4
Whut up D!? Any update on your SC brothuh!? i hope all is good man..
Still running lol... been busy working on the other car...
Originally Posted by CatManD3W
More videos of the SC in action.....PLEASE......Lets hear that BW
No videos, i'd like to though. I have 700 miles on this, pretty satisfied with Aristo ECU, might sell my MAP ECU 3.
hhhmmm been busy with that IS300 huh ? You can now send me your 2jzgte harness so I can look at it. You said you have an odb1 harness right ? And you have an odb2 car right ?
Don't forget to send that bottle of Patron too. I am out of stock...lmaol. J/K
Damn, before I forget . How is my 2jzge short block ? I hope it isn't rusty yet .