RSpec Project GS350
#1
RSpec Project GS350
Hello everyone just wanted to show you guys pictures of my car. The car is still missing a lot of stuff. Hope you guys like
Here are my spec-
2013 GS350 FSport
Exterior-
-Starfire White
-USDM Bi-LED Headlights
-JDM Fog Lights
-Lexus OEM Window Visor
-Skipper
Carbon Fiber Front Lip
Side Skirts (Painted Gloss Blk)
-Wrapped Gloss Blk Diffuser
-Wrapped Red Rear Turn Signals
-Interior-
-Cabernet Leather
-Engine-
-LEM
Titanium Intake
-Invidia
Full Exhust System
Suspension-
-RS*R
Black-i Coilovers
-Exotic Air
Cup Kit
3 Gallon Tank
-T-Demand
Pro Arm Front Upper Arm (Oni-Camber -55 to 0)
Wheels-
-SSR
Executor
CV03 (Flar Bronze w/Red Caps)
Fronts: 20X9.5 Offset +30 SL Disk
Rear: 20X10.5 Offset +30 SL Disk
-Falken
FK453
Fronts: 245X30 (Rolled)
Rear: 255X35 (Shaved and Rolled)
-Project Kics
R40 Inconix (Blk)
Things I'm waiting or have not put on yet
-Lexon Carbon Fiber Diffuser (I'm really getting annoyed with this company I have been waiting on them for 8 months now. I had to wrapped my stock diffuser because of them for a show I was doing) upated was not Lexon fault but Speed Element. Going through Mastermind and hopefully will be getting it on the end of Feb. If you want to read the story see post 31
-Wald Duck Tail Spoiler (Waiting to find another truck so I can mold it)
-Titanium Quad Exhaust Tips (cant put them on because I'm missing that thing i mention on top)
-Revier LED 3rd Stop Lamp (Something again with the missing part)
-T-Demand Front Lower Arm, Short Knockle Rear Upper Arm, Roll Center, Rear Token Arm Rear Tension Arm, and Sway Bars
Here are my spec-
2013 GS350 FSport
Exterior-
-Starfire White
-USDM Bi-LED Headlights
-JDM Fog Lights
-Lexus OEM Window Visor
-Skipper
Carbon Fiber Front Lip
Side Skirts (Painted Gloss Blk)
-Wrapped Gloss Blk Diffuser
-Wrapped Red Rear Turn Signals
-Interior-
-Cabernet Leather
-Engine-
-LEM
Titanium Intake
-Invidia
Full Exhust System
Suspension-
-RS*R
Black-i Coilovers
-Exotic Air
Cup Kit
3 Gallon Tank
-T-Demand
Pro Arm Front Upper Arm (Oni-Camber -55 to 0)
Wheels-
-SSR
Executor
CV03 (Flar Bronze w/Red Caps)
Fronts: 20X9.5 Offset +30 SL Disk
Rear: 20X10.5 Offset +30 SL Disk
-Falken
FK453
Fronts: 245X30 (Rolled)
Rear: 255X35 (Shaved and Rolled)
-Project Kics
R40 Inconix (Blk)
Things I'm waiting or have not put on yet
-Lexon Carbon Fiber Diffuser (I'm really getting annoyed with this company I have been waiting on them for 8 months now. I had to wrapped my stock diffuser because of them for a show I was doing) upated was not Lexon fault but Speed Element. Going through Mastermind and hopefully will be getting it on the end of Feb. If you want to read the story see post 31
-Wald Duck Tail Spoiler (Waiting to find another truck so I can mold it)
-Titanium Quad Exhaust Tips (cant put them on because I'm missing that thing i mention on top)
-Revier LED 3rd Stop Lamp (Something again with the missing part)
-T-Demand Front Lower Arm, Short Knockle Rear Upper Arm, Roll Center, Rear Token Arm Rear Tension Arm, and Sway Bars
Last edited by DoriSaru15; 02-09-15 at 12:38 PM.
#5
Looks sick, dude. CV03s are tight. Love the bronze finish. Skipper sides didn't come in CF? Side profile pics plz.
Lastly, where did you get the front license plate mount? Need to buy one just in case I get a fix-it-ticket.
Lastly, where did you get the front license plate mount? Need to buy one just in case I get a fix-it-ticket.
#7
Thank you. I had my parts sitting for awhile now. I usually wait until all my parts come in, but since my Lexon diffuser is taking long i just gave up. lol
Thank you
Thank You They are actually CV03. I decided to go with these one instead. If i would have gotten the step lip the face for the front would be protruding past the lip due to the offset.
Yeah, skipper only makes FRP sides Its ok Im about to change it up again. Already planing on getting Aimgain.
here is the side. White is a hard color to take pictures with.
I made my Lic plate mount. I used the last gen GS tow hook. Cut the end and welded a nut. Drilled a hole in a plate and screwed it in the nut.
Thank you
Thank you
Yeah, skipper only makes FRP sides Its ok Im about to change it up again. Already planing on getting Aimgain.
here is the side. White is a hard color to take pictures with.
I made my Lic plate mount. I used the last gen GS tow hook. Cut the end and welded a nut. Drilled a hole in a plate and screwed it in the nut.
Thank you
Trending Topics
#10
#12
Nice seeing this in person at 86Fest. My favorite 4th Gen GS 350 on Club Lexus!
Very aggressive wheel fitment as well. I love the SSR's. Props for going the less travelled route on your wheel choice.
Well done!It looks bad @ss and pictures really don't do the car justice.
Very aggressive wheel fitment as well. I love the SSR's. Props for going the less travelled route on your wheel choice.
Well done!It looks bad @ss and pictures really don't do the car justice.
#14
Yup, same here I thought it wouldn't fit but since it was concave it fitted perfectly
It was great talking to you at 86Fest. Thank you so much!! I'm very grateful for those words especially since its coming from you I hope you stick with Lexus for your next car but if you don't its ok because all your cars are always awesome to look at
Thank you
Nice seeing this in person at 86Fest. My favorite 4th Gen GS 350 on Club Lexus!
Very aggressive wheel fitment as well. I love the SSR's. Props for going the less travelled route on your wheel choice.
Well done!It looks bad @ss and pictures really don't do the car justice.
Very aggressive wheel fitment as well. I love the SSR's. Props for going the less travelled route on your wheel choice.
Well done!It looks bad @ss and pictures really don't do the car justice.
Thank you
#15
Video of my cup kit going up and down
Here is a video of my cups going up and down.
here is a good link explaining the difference between air bags and air cups
http://custompinoyrides.com/2013/02/...its-explained/
here is a good link explaining the difference between air bags and air cups
http://custompinoyrides.com/2013/02/...its-explained/