FullAtomic -- 2014 IS350 F Sport AWD -- Scratch Old One
#76
Pole Position
Thread Starter
He had to cut the OEM diffuser underneath the car. But yes, you will pull off the bumper for ease of access.
#77
Pole Position
Thread Starter
You can see where my guy cut so that it could fit flush with the SEIBON diffuser.
Yes, You will have to pull off the bumper. Don't think of it as scary, think of it as an ease of access. You gotta do the right thing -- it's just a pain in the @$$ when you can't get an angle to bolt the diffuser in.
#79
Pole Position
Thread Starter
#81
Pole Position
Thread Starter
#83
Pole Position
Thread Starter
#84
Driver School Candidate
Join Date: Jun 2015
Location: Toronto
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I'm really satisfied with the stock car. Just tints within a week or so and perhaps a set of winter tires/wheels. Any recommendations on the aforementioned would be great!
#85
Pole Position
Thread Starter
PM me if you wanna talk about wheel possibilities and other mods, if you're interested!
#86
Driver School Candidate
Join Date: Feb 2014
Location: ny
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
#87
Driver School Candidate
Join Date: Feb 2014
Location: ny
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
OK Club Lexus,
received my SEIBON RF diffuser. Product was packaged extremely well, considering I'm from Toronto (Canada) and was shipped from California.
The one thing I'll need to do however, is get my exhaust to poke out another inch or 2. My guy has some work to do.
received my SEIBON RF diffuser. Product was packaged extremely well, considering I'm from Toronto (Canada) and was shipped from California.
The one thing I'll need to do however, is get my exhaust to poke out another inch or 2. My guy has some work to do.
i couldnt decide on the oem one or this style but now that i see it on the car WOW!
#88
Both look good can't wait to gets ine tomorrow. I just hope I can figure out how to take the bumper off myself I don't want to pay someone to do it. I agree I think we will need to extend the exhaust out a bit farther. I have a magnaflow axleback so hopefully it's not too big a job to extend it.
#89
Where did you take your car to get the diffuser installed and how much if you don't mind. I just tried all day and can't seem to get the bumper off. I can't find any good posts either showing any tips for getting it off.
Thanks
Thanks
#90
Pole Position
Thread Starter
Called a local shop by my work that had a hoist. Fortunately the owners son, who also a mechanic, does a lot of modding himself. The company is called "Montana's" over near Jane and Finch (yes, I work at Hwy400/Finch).
Yes, it's a little complicated, but don't worry too much.
Yes, it's a little complicated, but don't worry too much.