Ben's SLOW '97 GS300 Build
#16
Pole Position
Thread Starter
#17
Pole Position
Thread Starter
Doing my stereo set up slowly
Put some 'Ping Jing' sound deadener in the boot and around the rear seats, and made a little amp mount on the brace behind the back seats. Hopefully when I put all the carpet back in the amps will be able to mount straight through it, to the MDF rack.
Got an Alpine IVE-W554ABT double din headunit, Polk MM6501 front speakers, Alpine MRP-M850 Mono amp and a Alpine Type X 12" sub, in a small(ish) box. I still need to pick up a 4 channel amp and some rear speakers, and I'll be going to a custom sub box reasonably soon
Heaps of deadening in the spare wheel well (and the wheel and tyre are 100% brand new and look mint!)
Put some 'Ping Jing' sound deadener in the boot and around the rear seats, and made a little amp mount on the brace behind the back seats. Hopefully when I put all the carpet back in the amps will be able to mount straight through it, to the MDF rack.
Got an Alpine IVE-W554ABT double din headunit, Polk MM6501 front speakers, Alpine MRP-M850 Mono amp and a Alpine Type X 12" sub, in a small(ish) box. I still need to pick up a 4 channel amp and some rear speakers, and I'll be going to a custom sub box reasonably soon
Heaps of deadening in the spare wheel well (and the wheel and tyre are 100% brand new and look mint!)
#18
Pole Position
Thread Starter
Few new things
Painted my factory tails red, which IMO looked pretty sweet, but I couldn't get the indicator or reverse light to look quite right, and don't really want to risk getting a defect (Already been done for having my fog lights on -_-).
So I managed to pick up some later model tails AND a roof spoiler! Mad!
On a bad note, reversed into my girlfriends car! Whoops. No mark from where I tapped her, but it did crack my bumper. How would I go about repairing this? Would use fibreglass reinforced filler be strong enough?
Painted my factory tails red, which IMO looked pretty sweet, but I couldn't get the indicator or reverse light to look quite right, and don't really want to risk getting a defect (Already been done for having my fog lights on -_-).
So I managed to pick up some later model tails AND a roof spoiler! Mad!
On a bad note, reversed into my girlfriends car! Whoops. No mark from where I tapped her, but it did crack my bumper. How would I go about repairing this? Would use fibreglass reinforced filler be strong enough?
#22
Pole Position
Thread Starter
Wasn't a defect for the fog lights, but a specific ticket for them. They're not even bright either! I see WAY brighter DRLs on new mercs etc. I use them a bit less now, but it's such a temptation when I see more and more cars with them on as I drive around. I want to show people I'm cool, not and old man LOL
#23
Pole Position
Thread Starter
#25
Lead Lap
iTrader: (1)
1. Prep area then two part plastic specific filler (it's like $50 for a good tube of it)
2. Glazing/finishing putty over that.
3. prep/prime/paint
Hard to say by pictures how bad the damage is...
More pics of the roof spoiler! What brand is it?
#26
Pole Position
Thread Starter
Cheers for the advice. Might end up trying to find a new bumper, but at least I have stickers to cover the damage up for now haha.
Spoiler is apparently a Vanquish brand, supposedly genuine Japanese product. Fitment was good, except around each side where it sits a little high (not much at all). Might put some sikaflex in the corners, other than that I just used the 3M double sided tape which seems to be super strong. It's a nice low profile spoiler, which IMO suits the car and how I want it to look when I'm finished with it.
Spoiler is apparently a Vanquish brand, supposedly genuine Japanese product. Fitment was good, except around each side where it sits a little high (not much at all). Might put some sikaflex in the corners, other than that I just used the 3M double sided tape which seems to be super strong. It's a nice low profile spoiler, which IMO suits the car and how I want it to look when I'm finished with it.
#28
Pole Position
Thread Starter
Ayyyy, slight update!
Got some wheels. Still stock height so it looks dicky as hell, and has so much poke LOL.
Work Kiwami 19 x 9.5 + 25 all round! Few little marks I need to fix up on them
I had a set of Volk SF winning that I was going to run, but one needed reapir, then these came up.
I added a trans cooler, since I had to replace the radiator, then the fitting for the factory one decided to get all messed up, so I decided to bypass it :P
Also bought a smaller amp, so I can tidy my boot up!
I've started studying again so less $$$ But hopefully I can keep dumping most of my money on the GS! My girlfriend wants me to save for a house though
Also did sway bar bushes, yay!
Still got a few things I want to do, but DEFINITELY need coilovers, and rear brake pads! So squeaky!
Got some wheels. Still stock height so it looks dicky as hell, and has so much poke LOL.
Work Kiwami 19 x 9.5 + 25 all round! Few little marks I need to fix up on them
I had a set of Volk SF winning that I was going to run, but one needed reapir, then these came up.
I added a trans cooler, since I had to replace the radiator, then the fitting for the factory one decided to get all messed up, so I decided to bypass it :P
Also bought a smaller amp, so I can tidy my boot up!
I've started studying again so less $$$ But hopefully I can keep dumping most of my money on the GS! My girlfriend wants me to save for a house though
Also did sway bar bushes, yay!
Still got a few things I want to do, but DEFINITELY need coilovers, and rear brake pads! So squeaky!
#29
Pole Position
Thread Starter
Done a few things.
Replaces rear brakes, but still need to get a few things done (small leak in exhaust), but car is driving pretty well atm. Looks like my A/C actuator thingo is on the way out.
Hit the drag strip yesterday for the first time and did an... unimpressive time :P 16.6 on both runs at 84 MPH - at least I'm consistent!
Looks fast in the pic, too
Replaces rear brakes, but still need to get a few things done (small leak in exhaust), but car is driving pretty well atm. Looks like my A/C actuator thingo is on the way out.
Hit the drag strip yesterday for the first time and did an... unimpressive time :P 16.6 on both runs at 84 MPH - at least I'm consistent!
Looks fast in the pic, too
Last edited by Bhubb18; 04-06-16 at 05:20 PM.