jiggahwh0's Build Thread
12-08-17, 12:50 PM
#121
No offense to the OP’s setup, but you’re basing wheels specs off a car that is going in the entirely different direction you are. Those wheel specs aren’t centered around performance in the slightest. Will require stretched narrow tires, and a **** ton of negative camber which will reduce your contact patch to the pavement.
Should be looking at, I hate to say it, I8ABMR’s threads, because a higher offset wider wheel package to house a wide sticky tire is what you are going to need for that blower. Performance driven guys are gonna look at 11’s or maybe a 10.5 with offsets in the 40-50 range.
Should be looking at, I hate to say it, I8ABMR’s threads, because a higher offset wider wheel package to house a wide sticky tire is what you are going to need for that blower. Performance driven guys are gonna look at 11’s or maybe a 10.5 with offsets in the 40-50 range.
12-08-17, 02:08 PM
#122
Pole Position
Thread Starter
No offense to the OP’s setup, but you’re basing wheels specs off a car that is going in the entirely different direction you are. Those wheel specs aren’t centered around performance in the slightest. Will require stretched narrow tires, and a **** ton of negative camber which will reduce your contact patch to the pavement.
Should be looking at, I hate to say it, I8ABMR’s threads, because a higher offset wider wheel package to house a wide sticky tire is what you are going to need for that blower. Performance driven guys are gonna look at 11’s or maybe a 10.5 with offsets in the 40-50 range.
Should be looking at, I hate to say it, I8ABMR’s threads, because a higher offset wider wheel package to house a wide sticky tire is what you are going to need for that blower. Performance driven guys are gonna look at 11’s or maybe a 10.5 with offsets in the 40-50 range.
yea i also have a set of forgeline GS1R competition 18x10 square set up that im waiting patiently waiting for gonna try and run 295/35
The following users liked this post:
ModInJapan (03-23-18)
The following users liked this post:
MLRSTJ (12-19-19)
12-20-19, 04:18 AM
#128
Moderator
Did you tune this? I wish there were currently available turbo options.
The following users liked this post:
MLRSTJ (12-20-19)
Thread
Thread Starter
Forum
Replies
Last Post
